|
|
Post by Dieseljunky38 on Feb 11, 2017 15:46:46 GMT
Hello I was told I can prime the fuel system after changing the fuel filter on my 15 Jetta tdi, but I can't figure out how to do it. I found where I can reset the oil change counter but priming the fuel system. Any help would be appreciated thank you
|
|
|
|
Post by Daniel (Germany) on Feb 11, 2017 16:11:04 GMT
Dont know how to do it via obdeleven. I do it this way on my touran 1t3 diesel. Open the fuel filter can, change filter inside , fill it up with diesel, close it, start car. Works for me.
|
|
|
|
Post by Dieseljunky38 on Dec 23, 2017 20:09:33 GMT
I would also like to know this. I do not like the idea of filling the filter.... contaminates the fuel system and still let's air travel into the high pressure fuel pump which leaves it without lubrication, and even for a split second causes damage with such tight tolerances and will ultimately shorten it's lifespan.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 23, 2017 21:05:39 GMT
have you checked the tube of you there are several video's on how this is done with VCDS.
Example would be
I have a different petrol car but hopefully it will help.
|
|
|
|
Post by wilsonbaird on Feb 13, 2018 2:27:44 GMT
If you just change the filter cartridge, clog the center hole with an finger and slowly fill the rest of the filter bowl. Then top off the center as well. Carefully install the top cover and start the car. It has worked with no problems several times on my 2015 TDI's. Good lock
|
|
