|
|
Post by szantaifoto on Aug 11, 2021 6:27:19 GMT
Hello
I changed my low (H7) and high beam (H15) bulbs to LED bulbs. Unfortunately the DRL (H15) is to bright.
I would like to ask, how can I dimming or change the brightness level with ODBeleven.
Thx Your support. 
|
|
|
|
Post by dv52 (Australia) on Aug 11, 2021 7:06:33 GMT
szantaifoto : If you want to pursue this matter and assuming that the factory fitted DRLs are incandescent - post up a copy of the settings for Leuchte4TFL LB4. To be clear, I need to see ALL 19 x adaptation channels for this Leuchte-set
Don
|
|
|
|
Post by szantaifoto on Aug 16, 2021 14:01:55 GMT
Hello Again Thx Your support. Where find this? Regards Balázs |
|
|
|
Post by szantaifoto on Aug 16, 2021 16:00:10 GMT
|
|
|
|
Post by dv52 (Australia) on Aug 16, 2021 21:59:00 GMT
Try changing Leuchte4TFL LB4-Dimmwert AB 4 and Leuchte5 TFL RB32-Dimmwert AB 5 to a lower number (experiment until you find a number that suits)
Don
|
|
|
|
Post by szantaifoto on Aug 19, 2021 6:33:06 GMT
Hello Don
THX Your support, DLR dimming works fine.
regads: Balázs
|
|
