|
|
Post by michael1 on Aug 10, 2021 23:26:17 GMT
Is it possible to activate epb with encoding when any door is open? Now on a lot of cars it only works on opening the driver’s door, but it would be a lot safer that you can’t drive until all the passengers are in the car and the door is closed
|
|
|
|
Post by Claudiu on Aug 16, 2021 10:47:18 GMT
Module 17, adaptation, ignition active message and then change from driver door to all doors
|
|
|
|
Post by michael1 on Aug 19, 2021 22:59:38 GMT
Hi Try but can’t any change because function not available, maybe need security login in IC cluster? Try at Passat B7 2013 but some message, both car are with DSG transmision, have Autohold, after open driver dor EPB automatic aplay.
|
|
|
|
Post by Claudiu on Aug 20, 2021 6:28:23 GMT
Try security access 47115 .
|
|
|
|
Post by michael1 on Aug 29, 2021 22:08:31 GMT
Try login with 47115 but not working, Needle Sweep also can't activate.
|
|
