rrutk
New Member
Posts: 3 
|
Post by rrutk on Feb 9, 2017 15:01:22 GMT
With OBD11 it's possible to activate the green hidden menu in an Audi A3 8V, right? Is it still possible to activate the BLUETOOTH-Module inside the A3 8V through the green menu, like in older A3 ? It's an A3 8V with the little MMI without NAV/Connectivity  |
|
KLCC
New Member
Posts: 6
|
Post by KLCC on Jul 18, 2017 5:23:37 GMT
Green Menu is "Developer Mode" and is not available in A3 8V. You can only get "Engineering Mode" by pressing "back button" + "Top left Selection Button (around the jog dial)"... nothing can be changed there though.
|
|
|
|
Post by jmgmru on Nov 9, 2020 10:40:00 GMT
Hi,
in the Green Menu have you been able to see how
to have the Car menu
instead of Production
|
|
jovan
New Member
Posts: 1
|
Post by jovan on Dec 8, 2023 17:59:45 GMT
With OBD11 it's possible to activate the green hidden menu in an Audi A3 8V, right? Is it still possible to activate the BLUETOOTH-Module inside the A3 8V through the green menu, like in older A3 ? It's an A3 8V with the little MMI without NAV/Connectivity Did any of you find a way to activate Bluetooth in Audi A3 8V if it's not available from factory, but somewhere in MMI I can find what Bluetooth version is in car? Green engineering menu is available but I don't know what to look for in there. The car is equipped with MMI Radio. |
|
|
|
Post by dv52 (Australia) on Dec 8, 2023 19:55:07 GMT
jovan : Hi. Bluetooth is what's called "SWAP" (Software As Product). This means that to enable the feature, a license is needed which is called a FEC -Facility Enabling Code.
I'm not sure how this car was built - but it's unlikely for a vehicle that was NOT factory built with Bluetooth to have the FEC activated.
Alas, OBD11 can't be used to authorize the Bluetooth FEC
Don
|
|
