|
Post by maniek on Jul 28, 2021 17:39:31 GMT
I made this procedure in my car- works, no errors----- It has traffic sign recognition from the factory.
A5:
System description: MQB MFK 3.0
Software number: 2Q0980653
Software version: 1027
Hardware number: 2Q0980653
Hardware version: H11
Control unit A5 > LONG coding: "ACC" -> CODED "Point_of_Intervention"-> "early_setting_over_menu" "Configuration_for_lane_departure_warning_kl15"-> "Last_setting" " Lane_Assist_system_mode"-> "Selection_over_menu" "HC"-> CODED "HC_messages"-> CODED "HC_Warning_intensity"-> "Seting_over_Menu" " HC_Variante"-> Variante_1
Control unit 5F > Adaptation :
"Car_Function_List_BAP_Gen2"->"LDW_HCA_0x19" > "aktiviert" "Car_Function_List_BAP_Gen2"->"LDW_HCA_0x19_msg_bus" > "Datenbus Extended" "Car_Function_Adaptations_Gen2"->"menu_display_Lane_Departure_Warning" > "aktiviert" "Car_Function_Adaptations_Gen2"->"menu_display_Lane_Departure_Warning_over_threshold_high" > "aktiviert"
"Car_Function_Adaptations_Gen2"->"menu_display_Lane_assistant" > "aktiviert" "Car_Function_Adaptations_Gen2"->"menu_display_Lane_assistant_over_threshold_high" > "aktiviert"
CONTROL UNIT 17 > LONG CODING > HEX:
> Byte 04 > Bit 6 aktivieren ("Spurhalteassistent / Lane Assist verbaut") > Byte 11 > Bit 1 aktivieren ("Spurhalteassistent / Lane Assist Information (BAP) verbaut/aktiv")
Control unit 44 > long coding > HEX:
Byte 03 > Bit 0 aktivieren ("Spurhalteassistent verbaut")
for control units 17 and 44 is possible to use LONG CODING by text, hex is not necessary
|
|
|
Post by gasman on Aug 5, 2021 15:53:13 GMT
Tried to put this on model year 2020 with traffic sign recognition etc from factory via the shortcut rather than long coding, always comes up as failed. Any ideas ? Or will I have to long code
|
|
|
Post by stan087 on Aug 14, 2021 21:28:03 GMT
I tried to put this in but it didn’t work and high beam assist and now I’ve lost side assist and adaptive cruise control and have 2 warning lights for dynamic cornering lights and front light fault.
I’ve now got lane assist working but not yet sorted traffic sign assist yet.
|
|
|
Post by maniek on Aug 17, 2021 6:14:50 GMT
Hi gasman,
what do you mean----- via the shortcut?
a few days ago, I noticed that there is an application to implement this function - did you try to apply?-- cost 100 credits
|
|
ummel
New Member
Posts: 2
|
Post by ummel on Aug 22, 2021 12:43:53 GMT
The "shortcut" says that there ist important to get MIB2. BUT in no iV is installed MIB2... It is MIB3 all the time. I think that could Not work
|
|
slakon
Closed beta tester
Posts: 1
|
Post by slakon on Aug 22, 2021 14:05:35 GMT
Lane assist MIB3 superb 2021, any idea?
|
|
|
Post by gasman on Aug 22, 2021 18:24:57 GMT
Hi. I tried the application ie 100 credits,but will not install always comes up failed
|
|
|
Post by stan087 on Aug 28, 2021 12:51:37 GMT
You have to activate it through security code in A5
|
|
|
Post by warkman on Aug 28, 2021 18:03:47 GMT
My 21 superb us mib3 so the application doesn’t work on that my
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Aug 31, 2021 21:30:58 GMT
Hello Maniek,
Could you please share your Long coding Number from A5 unit ?
Will help a lot , seems we have same A5 unit but I have a different car , Kamiq MY2021 and I can't activa adaptive lane Guidance, although normal lane assist was activated from factory on my car.
Thank you in advance!
|
|
|
Post by maniek on Sept 23, 2021 9:49:20 GMT
Hi,
here you are
0002 0898 1148 4028 908F 0000 1030 0080 0123 0000......0000
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Sept 25, 2021 5:44:16 GMT
Hi Maniek thank you for your asnwer! Could you please provide some more information about A5 unit ? As i told you i am trying to figure out, why on my A5 unit i cannot use from Infotainment System ''Adaptive Lane Guidance''! If you can provide pictures of A5 unit info and A5 unit Long coding (find mine bellow), will help me a lot! I am looking for somebody with same A5 unit for long time and i feel really pleased for your help! Attachments:
|
|
|
Post by maniek on Sept 25, 2021 20:10:22 GMT
ok-- comparative table
|
|
rares
New Member
Posts: 3
|
Post by rares on Jan 7, 2022 8:32:24 GMT
Hi, I have Superb MY 2020 with Front Assist but without ACC. I used the coding you provided for Lane Assist and it woks. But I cannot check the Adaptive Lane Guidance. It is there in the infotainment, just doesn't let me check it. Did solve this problem? Thank for your answer
|
|
|
Post by maniek on Jan 14, 2022 8:14:59 GMT
hi,
unfortunately - in my opinion, if you don't have ACC--- then 'Adaptive Lane Guidance won't be work
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Apr 16, 2022 13:44:14 GMT
Hi Maniek thank you for your asnwer! Could you please provide some more information about A5 unit ? As i told you i am trying to figure out, why on my A5 unit i cannot use from Infotainment System ''Adaptive Lane Guidance''! If you can provide pictures of A5 unit info and A5 unit Long coding (find mine bellow), will help me a lot! I am looking for somebody with same A5 unit for long time and i feel really pleased for your help! ***Finally i have found the solution!!!*** After an update from my dealer on A5(camera) unit from Software version 1030 to 1302(software number 2Q0980653C) and on 5f(multimidia) unit to 1760(software number 654035869D) , adaptive lane assist works perfect! Point of intervation set to ''early setting via menu'' on A5 unit. EnJoy!
|
|
|
Post by maniek on Apr 20, 2022 8:18:10 GMT
hi Nikos,
Great, i'm glad to hear that.
question: did you have to activate the ACC?
|
|
|
Post by fitzy547 on Jun 19, 2022 18:16:08 GMT
Did you ever get lane assist working, I tried this and got the same problem as you losing acc, side assist and two warning lights for light assist and cornering lights. I don’t want traffic sign recognition- as far as I’m aware that’s now SWaP so has to be activated by someone who has a factory link?
|
|
|
Post by chris23 on Nov 18, 2022 21:59:35 GMT
Apologies for the newbie questions but I'm attempting the above procedure to activate lane assist.
Using long coding, I see instructions to both Activate and Set bits for example. Are Activating and Setting the same action?
Byte 09 > Activate bit 7 ("HC", 1 -coded)
I assume here, I simply select Byte 09, tick the Bit 7 and swipe to save?
Byte 17 Set bit 5-7 to ("20 HC_variant_1")
I am confused whether this means simply ticking bits 5 through 7, or 5 * and * 7, or are these being edited to a value of HEX 20?
I have read the long coding guide and searched for step-by-step tutorials but am thoroughly confused.
Thanks in advance
|
|
|
Post by maniek on Dec 9, 2022 13:52:24 GMT
------Using long coding, I see instructions to both Activate and Set bits for example. Are Activating and Setting the same action?-------
Yep
-------Byte 09 > Activate bit 7 ("HC", 1 -coded)-------
-------I assume here, I simply select Byte 09, tick the Bit 7 and swipe to save?------
Yep
----Byte 17 Set bit 5-7 to ("20 HC_variant_1")-----
? what control unit you are talking about?
|
|