|
|
Post by ruinalin22 on Jul 30, 2021 9:37:04 GMT
My headlights didn't start the DLA, just the normal flashing process of the AFS. I noticed that there is an adaptation option for "Presentation Mode" that I can't activate, this worked before the fixes made to the 4B and Gateway modules. How do I active this feature again?. Other than that, the features of the headlights work perfectly, only the "Presentation Mode" that stopped.
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jul 30, 2021 21:50:29 GMT
That is in Basic Settings after you do a code in your long coding in 4B, Nothing to do with DLA.
I told you, please send me a BackUp in English need to check if Node_0x97 and Node_0x98 are not coded, Thats can interferes with your Dynamic Lights.
Hope you do not have to recode your DLA.
|
|
|
|
Post by ruinalin22 on Jul 31, 2021 4:16:13 GMT
When I did the Basic Settings in module 4B, lost the "Presentation run dynamic AFS light", i enabled again and returned the headlights in this condition again. As for the errors in the module "Gateway", I imagine that it is due to the Iphone that does not yet have the feature of generating automatic codes within the Gateway, and as I enabled the D6 and D7 inside it without the codes, I think that's why the U112600 errors appear. As for Backup in English, I'm 👍🏻
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jul 31, 2021 12:36:00 GMT
Ok. then looks like you figurated out how to fix it.
Is good. If you need help to work out the other faults.
Post your english backup. here to take a look.
|
|
|
|
Post by ruinalin22 on Aug 2, 2021 17:01:46 GMT
Garko I'm trying to switch Backup to Ingles to get you through. Ask a question if you can, I can install the OBDeleven app on another Android phone to have access to the "Auto Code Gateway" that I don't have on IOS, this using the same account I use on IOS. I imagine that if you do this, you will correct the codes for D6 and D7 Leds that were added in the Gateway Module and are generating the error in it.
|
|
|
|
Post by ruinalin22 on Aug 2, 2021 17:30:02 GMT
|
|
|
|
Post by ruinalin22 on Aug 2, 2021 17:33:14 GMT
Inside the IOS app, I can't switch Backup to English.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 2, 2021 18:10:07 GMT
ruinalin22 If you want to switch to any other language then Select Other Select Settings Go to bottom of screen and under Language order select Edit Then if you have got English use the three line on right hand side and drag it to the top of the list. If you dont have english thenuse Add language, it will appear at the bottom of the list. Use the three bars on right had side and drag to the top of the list Now Save. The whole app is now in English, Go to your backup and email as per normal and it will be sent in English Well that worked for me when I wanted it in Spanish.
PS You dont need to run another backup it converts your old backup into the language you have selected.
Hope that helps
|
|
|
|
Post by ruinalin22 on Aug 2, 2021 19:02:47 GMT
I understood perfectly, I did and it worked, thank you very much 👍🏻
|
|
|
|
Post by ruinalin22 on Aug 7, 2021 13:01:08 GMT
Guru, would you have how to pass me the encoding needed to enable on my Passat 2018 b8, the features "Traffic Jam Assist" and "Emergency Assist"?. I already have "Line Assist" up and running👍🏻
|
|
|
|
Post by ruinalin22 on Aug 7, 2021 15:54:33 GMT
Garko was able to solve the problems of errors in the Gateway Module, where the D6 and D7 Leds was configured, but did not generate codes for themselves within the Gateway, I decided to install the PROGRAM OBDeleven on an Android phone and Did Automatic configuration in module Gateway 19 for the codes and everything returned to normal, and everything went green without previous failures recorded. Thanks for the tips. 👍🏻🙏🏻
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 7, 2021 16:30:47 GMT
Garko is the expert on this car
|
|
|
|
Post by ruinalin22 on Aug 8, 2021 13:54:28 GMT
Good morning Garko, would you have these resources that I asked the Guru?.
|
|
|
|
Post by ruinalin22 on Aug 11, 2021 13:50:16 GMT
testeronline (Guru) good morning, I need to enable Emergency Assist on my Passat 2018 B8, I have already enabled Line Assist and ACC. Would it be possible for you to pass the configuration to be done via OBDeleven Pro?.
|
|
|
|
Post by ruinalin22 on Aug 11, 2021 17:31:10 GMT
Emergency assist
:
Block 13 ACC
Byte 4 → Bit 2 → activate
Byte 6 → Bit 3 → activate
Block A5 Assistant Camera
Byte 16 → Bit 2-3 → 08 Emergency_Assist, EA_Variant_2
Block 3 Brakes
Byte 29 → Bit 5 → Activate
Adaptation
MAS11608-Electromechanical parking brake: emergenay braking
Block 9
Byte 6 → Bit 3 → Activate
Do you think this setup can work on my Passat MQB 2018 B8?.
|
|
|
|
Post by ruinalin22 on Aug 12, 2021 11:20:00 GMT
Garko:
Emergency assist
:
Block 13 ACC
Byte 4 → Bit 2 → activate
Byte 6 → Bit 3 → activate
Block A5 Assistant Camera
Byte 16 → Bit 2-3 → 08 Emergency_Assist, EA_Variant_2
Block 3 Brakes
Byte 29 → Bit 5 → Activate
Adaptation
MAS11608-Electromechanical parking brake: emergenay braking
Block 9
Byte 6 → Bit 3 → Activate
Do you think this setup can work on my Passat MQB 2018 B8?.
|
|
|
|
Post by ruinalin22 on Aug 12, 2021 13:33:53 GMT
activate Traffic Jam Assist, Emergency assist
EA confirmed to work in NAR models. Plus the logic that it only works for DSG doesn’t add up considering ACC, even without TJA, can stop the car without any issues and that’s a stock function.
The below is all in adaptations for the emergency brake flashing and I can confirm it works. 09 long coding is all 0s in VCDS as 09 has moved to adaptations.
Emergency Brake Flashing (works can confirm, emergency flashers come on and stay on until you hit the gas)
Select 09 Cent Electric
Security code 31347
Adaptations
(1)-Assistance light functions-Notbremsanzeige NBA default is not active change to active
(11)-Dyn. turn signal modes-Notwarn_blinken_NBA_Phase_2 default is not active change to active
(18)-Dyn. turn signal modes-Emergency_alert_blinken default is not active change to
Will this configuration also workon my Passat 2018 B8 - MQB?.
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Aug 17, 2021 12:20:46 GMT
Hi ruinalin22 Sorry I couldnt answer before, a lots of work in the Garage on last days. I did not tryed this coding for trafic Jam Assist. I will work it out, and come back with a secure coding, for u car. Just be patient, hope next week I have it. Sorry but, I have lots of work at the moment.  For now You can try this, not tested by me but, I will explain how to work with others codings.
Print this info:
And with your pen/pencil you will mark the canges you do, in case is already activated.
If it doesnt work, you can reverse the changes not marked, you did.
Traffic Jam Assist Coding MQB UnitsControl unit: 13 Adaptive Cruise ControlLong Coding: Assistent_for_traffic_hold_up -> activated Traffic_jam_assistant_in_car_menu -> activated Traffic_jam_dependent_linear_tracking -> activated Driveaway by triggerleaver -> activated Auto driveaway after short stop -> activated Auto driveaway by pretrigger -> activated Curve_assistent -> activated Dense_traffic -> activated Emergency_assist ->installed Emergency_steer_assist -> activated Note – some of these were already activated – I assume they are part of the stop & go function of the ACC. Control Unit A5: Front Sensors Driver Assistance System (Enter Security Code: 20103 before coding) Long Coding: STA -> coded Control Unit 44: SteeringLong Coding Heading control assistant -> active Traffic jam guidance assist -> active Control unit 5F: Information control unit (Enter Security Code: 20103 before coding) Adaptations Fahrzeug funktionsliste bap2 generation erweiterung: Front_traffic_assist_0x41 -> activated Front_traffic_assist_0x41_msg_bus -> terminal 15 Vehicle configuration: VZA pro: On (Fairly sure this one is not needed as relates to Speed Signs but I did enable it anyway) Reset Infotaiment: Press 10 sec on/off button.
|
|
|
|
Post by ruinalin22 on Aug 17, 2021 19:37:14 GMT
Ok, thanks for the attention, I will try this and stay awaiting new settings you pass👍🏻
|
|
|
|
Post by ruinalin22 on Aug 17, 2021 19:49:52 GMT
I can't find in Control unit 13, the "Dense_traffic" to activate it.
|
|
|
|
Post by ruinalin22 on Aug 20, 2021 11:31:52 GMT
Good morning, has some configuration for the Passat 2018 B8 for when I get out of the car and lock the same by the control, the windows of the doors close automatically?.
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Sept 4, 2021 9:51:38 GMT
Yes it is, You should look in the treads.
Look for comfort opening / closing
|
|
|
|
Post by pacopepe on Oct 28, 2021 20:43:03 GMT
Hello, I have a Passat B8 from the year 2016, with hig led lights and a camera in the rear view mirror. I have activated the light assistant function with 100 credits, but it has not worked for me. The biggest problem is that I have run out of high beams, it does not work, only the low beams work, I give the high beam lever the blue sign turns on but the headlights do nothing. please I need help. Thank you so much
|
|
