|
|
Post by kuvvet61 on Jul 14, 2021 8:19:31 GMT
Hello there
My car is 2021 model
When I want to turn off the brake disk drying function, it asks for the security access code. The 20103 and 40168 codes displayed by the system are not accepted. What is the code required to change the settings of this feature?
Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 14, 2021 8:44:18 GMT
Have to ask when you are coding do you have your bonnet open.
|
|
|
|
Post by kuvvet61 on Jul 14, 2021 11:02:06 GMT
The hood is not open.Does it have to be open?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 14, 2021 11:38:12 GMT
Yes on all new VAG Vehicles you now have the AUDI Bonnet / hood open protection so no coding allowed until its open but you can run scans.
|
|
|
|
Post by kuvvet61 on Jul 16, 2021 4:16:07 GMT
Hello there
Opening the hood didn't work.
|
|
|
|
Post by epitaly on Jan 4, 2023 14:08:15 GMT
Have you tried with security code 40304 ?
It worked to disable Brake Disc Wiper/Dryer on a Golf mk 7.5 TDI 2.0 4Motion, March 2018.
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 22, 2023 17:34:55 GMT
Hello, please has someone already found sec. access to unit 03 for brake drying?
20103, 40168 code takes, but does not work for drying.
40304 does not work.
Thank you very much
|
|
|
|
Post by stefflimitless on Apr 23, 2023 10:30:06 GMT
44595
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 24, 2023 5:46:46 GMT
stefflimitless, thank you very much. Unfortunately, the code 44595 will not be accepted at all 😒
|
|
|
|
Post by stefflimitless on Apr 24, 2023 5:59:16 GMT
You cam try this codes: 24435
24990
25004
25757
28183
31857
37202
40168
44595
40304
10505
19249
10815
37203
11122
14108
14451
25377
32304
33776
33777
37201
37483
74999
75201
75202
01138
01295
01972
02168
02537
02727
02817
02852
02919
03431
03499
04205
04286
04490
04538
04814
05008
05869
06723
07483
09102
09318
09854
20103
40168
These are Copies of codes from Ross Tech forum. All for ABS Module. Thanks to Don
|
|
|
|
Post by whataboutthis on Apr 24, 2023 7:06:29 GMT
Dont forget to check that you have not locked out your control unit.
Live Data Secuirty Access number of invalid keys should be set to 0, if its 3 or above then you need to leave ignition on for approx 5 minutes until the number returns to 0 otherwise it wont work.
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 24, 2023 8:00:12 GMT
Thank you guys so much!!! I will try the codes.
I have another question:
If I enter a wrong code and then immediately enter a good one (eg 20103) then I can keep trying, right?
At least that's how it works for me...
|
|
|
|
Post by whataboutthis on Apr 24, 2023 14:16:55 GMT
You can enter two bad codes and then on the third one select a good one and no issues,
Just check the live data element i shared and if its locked out you will a get a warning message when entering new codes saying something like its locked out. But if you leave the ignition on then after a short period of time its all open again.
Again if you just look at the live data element after entering a code if its wrong for the control unit then it will go to 1 instead of zero.
hope that makes sense
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 24, 2023 15:53:28 GMT
Yes that sure makes sense and thanks for confirming my point.
I always try to enter the code twice and if the unit does not accept them, I enter 20103 and I have 2 new attempts again...👍
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 24, 2023 17:39:14 GMT
So unfortunately, unit 03 will only accept 20103 a
40168.
No other codes work 😒😒😒
Brake drying cannot be changed 😒
Oh no.
|
|
|
|
Post by whataboutthis on Apr 24, 2023 18:30:32 GMT
On my 2014 car the security access code for this function is one of the following 40168/20103/40304
What error message do you get when you try and make the change using any of these codes.
I know none of us like them but have you tried using the one click app.
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 24, 2023 19:15:06 GMT
40304 unit does not take.
After entering 20103 or 40168 (the only codes the unit accepts) and changing the drying of the discs to a level other than medium (default), it says "security access required" and the change fails.
|
|
|
|
Post by stefflimitless on Apr 25, 2023 5:51:06 GMT
Have you tried entering Engineering mode, then enter security code and then coding? This helped for me to set the correction angles for ACC. Just a thought.
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 25, 2023 8:33:01 GMT
Ooo good idea sir!
I can try that.
But I don't know how to get into engineering mode and with what code? Or is it without code?
Here I have this selection in unit 03:
ENG118148-Developer_Function_1.00 00
ENG122614-Developer_Function_102, activated
ENG122615-Developer_Function_103, activated
ENG122619-Developer_Function_109, not activated
ENG125053-Developer_Function_120,Implicit
ENG118200-Developer_Function_3, not activated
ENG118201-Developer_Function_4.05
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 25, 2023 8:51:21 GMT
Maybe this is what you meant.
It is still possible to enter the security code S12345 developer mode.
It just flashes the screen but doesn't say it's a bad security code.
Even after that, however, it is not possible to change the brake drying value.
Should I try to enter S12345 and then enter some code that the unit didn't pick up before? Like 44595? (direct brake drying code)
|
|
|
|
Post by whataboutthis on Apr 25, 2023 11:56:32 GMT
No expert but I thought all security access codes were number not alpha numberic.
|
|
keras
New Member
Posts: 15
|
Post by keras on Apr 25, 2023 17:21:48 GMT
So sorry, I am confusing S12345 with unit 5F.
Unit 03 does not have such an option.
You have already remembered how to activate developer mode.
You have to enter the appropriate security code (S12345) and then enable developer mode in adaptations...
Unfortunately, I cannot activate the developer mod in 03, it requires a security code and 20103 and 40168 do not work for this.
The unit does not accept other codes (and I tried all available on the website and here on the forum). Only these two 20103 + 40168.
Thanks for the ideas 😉
|
|
|
|
Post by stefflimitless on Apr 25, 2023 21:06:27 GMT
Start obd11, chose unit 03. scroll down to: Change Service
Then select: development mode. Go back
Enter the codes which were working in Security access.
When it’s done you can try to code disc brake drying.
That’s what i meant.
|
|
keras
New Member
Posts: 15
|
Post by keras on May 9, 2023 16:49:30 GMT
Thank you very much.
Unfortunately, only 20103 and 40168 SA are functional on 2Q0-614-517.
It does not accept other SA even in developer mode.
Apparently it's a "new" unit on which SA is a secret.
|
|
|
|
Post by stefflimitless on May 10, 2023 21:35:47 GMT
I have the same unit and it works with the two codes you said. My Software Number ends with „AM“. Maybe yours is different.
You can try with VCDS, it mostly suggest more codes, if you have anyone nearby.
|
|
