pavlo
New Member
Posts: 2
|
Post by pavlo on Jul 13, 2021 16:26:02 GMT
Hello, I bought the obdeleven and wanted to activate the sign assist. However it says that function is not supported. How do I proceed from here? Should I use long codes and where I can find them? Even if I use it, how do I make sure to not brake things?
|
|
pavlo
New Member
Posts: 2
|
Post by pavlo on Jul 15, 2021 20:17:44 GMT
Ok, I did next for my Touran 2020 and it worked(partially from the link below): www.tiguanforums.co.uk/viewtopic.php?t=6086#p65923Adaption in 5F: Car_Function_List_BAP_Gen2: traffic_sign_recognition_0x21: activated traffic_sign_recognition_0x21_msg_bus: Databus Extended Car_Function_Adapations_Gen2: menu_display_road_sign_identification: activated menu_display_road_sign_identification_over_threshold_high: activated Then go to Coding Long Coding Byte 24, activate Bit 6 2. Module A5 Then go to Coding Long Coding Byte 16, activate Bit 4 3. Module 17 Then go to Coding Long Coding Byte 5, activate Bit 2 AS FAR AS I UNDERSTOOD FROM 2020 VW STARTED TO USE ANOTHER CAMERA SYSTEM, SO PLEASE USE THIS INSTRUCTION ONLY FOR 3Q CAMERA MODULES! |
|
|
|
Post by franccro on Nov 16, 2024 10:07:20 GMT
Hi I have activate factory sign assist, and I have alert Visual/Acoustic,but I want to be able to choose ony Visal and acoustic separately. Somebody know how coding to be separately?
|
|
