|
Post by joszer on Feb 4, 2017 5:05:35 GMT
Hey everyone, I noticed that on my car when my DRL's and Headlights are turned on that not all of my tail lights illuminate. The outside ones are the only ones that illuminate and it is only when I press on the brake pedal that the inside ones illuminate. There is no Dim setting for the inside ones. They are either all off or all on when the brake pedal is pressed. Is this normal? I have the Urban Joke V2 coded into the car so I am not sure if that messed anything up. Anyone know the VCDs coding to get the inside ones to illuminate? Here's a photo to show you guys what I mean Thanks
|
|
|
Post by Daniel (Germany) on Feb 4, 2017 10:14:49 GMT
Please remove coding for urban joke v2 and check if everything is fine then. I think you did a mistake by coding urban joke.
|
|
|
Post by joszer on Feb 4, 2017 15:56:27 GMT
I found this Guide that helped me revert all my settings back to stock. From there I readded the urban joke and it works flawlessly now. The interesting thing is that I used the OBDEleven App to apply the Urban joke. When I went back to have it reset it back to standard it said that my car was not supported. Weird since it applied it before. Thanks Again The Guide that helped:
|
|
|
Post by Daniel (Germany) on Feb 4, 2017 16:37:43 GMT
Fine that you figured it out by yourself, i dont use apps, because i want to know which settings are getting change.
|
|
|
Post by mikesail on Feb 13, 2017 13:42:05 GMT
I found this Guide that helped me revert all my settings back to stock. From there I readded the urban joke and it works flawlessly now. The interesting thing is that I used the OBDEleven App to apply the Urban joke. When I went back to have it reset it back to standard it said that my car was not supported. Weird since it applied it before. Thanks Again The Guide that helped: Same here.Urban Joke worked before,now is not supported:((
|
|
|
Post by dv52 (Australia) on Feb 13, 2017 23:04:08 GMT
mike: that's exactly the problem with Apps - they don't leave any records in the History report telling the user what actual changes were made (all you get is an unhelpful entry in the History report saying that the App was installed).
I'm guessing, but I suspect that the problem for those that have implemented this tweak is that it changes lots of adaptation channels. When you attempt to use the App again to remove the tweak, the App checks ALL the adaptation channels that were originally changed to confirm that each contains the urban joke values. If you have subsequently altered any of these channels (even just altering a dimming value), the App spits-the-dummy and it won't proceed. But I'm guessing!
Moral of the story - DON'T USE APPS. Until OBD11 changes their history recording protocols and until OBD11 re-thinks the way that Apps re-checks values when reverting settings (I've already suggested a better way of doing this for Leuchte channels), always, always do tweaks manually. If you do tweaks this way, you get a specific record of each change, there is no additional expense and most importantly - you actually learn something!
Don
|
|