lp81
New Member
Posts: 12
|
Post by lp81 on Jul 3, 2021 17:13:15 GMT
Hi all,
I have tried changing the adaptions to allow the Speedo needles to light up but when I save it, it tells me it’s not available?
Any ideas how I activate them? Can’t see what speed I’m doing at night!
Ta
|
|
lp81
New Member
Posts: 12
|
Post by lp81 on Jul 3, 2021 17:14:31 GMT
For info I have tried the below:
Module: 17
Adaptation Channel: illumination algorithm - pointer illumination algorithm
new value: term58xd_log_bus_parkinglight
As I said it won’t save the adaption.
|
|
|
|
Post by dv52 (Australia) on Jul 4, 2021 0:04:30 GMT
hmm.......... try this instead module 17 (dashboard) enter security code 20103 if the car was built prior to 2016 and 47115 if after adaptation channel: Illumination_algorithm-Scale_switching_algorithm > lds
This forces the instrument cluster to turn-on lighting according to the LDS (i.e. the position of the rotary light switch)
Don
|
|
lp81
New Member
Posts: 12
|
Post by lp81 on Jul 4, 2021 10:43:32 GMT
Hi Don,
Thanks for the advice.
Under the illumination adaptions it doesn’t have the Scale_switching_algorithm…
Unless I’m looking in the wrong place?
Seems nuts that I can’t turn them on?
Thanks
Liam
|
|
|
|
Post by dv52 (Australia) on Jul 4, 2021 22:14:44 GMT
Liam: what type of mk7 do you have and what country (I assume USA) ?
Don
|
|
lp81
New Member
Posts: 12
|
Post by lp81 on Jul 5, 2021 3:21:07 GMT
Hi Don,
Sorry for the multiple posts.
I’ll just respond in the other thread.
Thanks for your help
Liam
|
|
|
|
Post by vwjap on Jul 5, 2021 6:05:33 GMT
You should just post in here, the other thread is for people to post codings and adaptions that work, it was never meant for questions (don’t worry your not the only one)
|
|
