|
|
Post by kuvvet61 on Jun 29, 2021 4:43:19 GMT
Hello there;
How can I activate the monte carlo startup logo on my bolero radio.
|
|
|
|
Post by Car Code on Jul 6, 2021 6:35:25 GMT
 Have You tried this from older models? |
|
|
|
Post by arkenatas on Jul 7, 2021 13:21:28 GMT
5F byte 18 Bit 0~2
No effect
|
|
|
|
Post by Car Code on Jul 7, 2021 15:28:12 GMT
Function not available or no effect?
If there is no effect try holding multimedia power button for 10 sec to restart it or try soft reset in central electrics.
This soft reset in CE09 should be safe. I have done it multiple times on my scala when one of my menus in multimedia is not available.
|
|
|
|
Post by arkenatas on Jul 8, 2021 12:49:30 GMT
OBDeleven show (31)Function not available Car CodeDoes this function work in your scala? |
|
|
|
Post by jesse93 on Jul 9, 2021 8:10:46 GMT
There is no long coding for MIB3. The only adjustments in 5F are possible in adaptations.
|
|
|
|
Post by Car Code on Jul 12, 2021 7:22:58 GMT
OBDeleven show (31)Function not available Car CodeDoes this function work in your scala? Tried later, no success. jesse93Any idea how to change startup animation then? |
|
|
|
Post by stefflimitless on Jul 22, 2021 7:58:37 GMT
Tried with function_configuration_hmi on 5f to change skinning and screening adaptation. Then the MIB stuck on “welcome to skoda” startup screen. Maybe it is to change there. Haven’t t tried Others yet.
On the VC the adaptation screen_sticker_hmi set to 3 works and shows the VRS theme.
|
|
|
|
Post by Car Code on Jul 22, 2021 10:43:05 GMT
stefflimitlessFunction "startup_screen_sticker_hmi" is also available in 5F in adaptations. If it worked for VC, will it also work on 5F multimedia? If Your multimedia is stuck try with reset(not basic settings, RESET) in C.E. 09 after You set old values in adaptations.
|
|
|
|
Post by stefflimitless on Jul 23, 2021 8:45:59 GMT
I know, i set it there for VC, like i wrote.
Still stuck on Multimedia boot screen. Already did the reset with hold menu button for 10 seconds. Afterwards it’s not booting after “welcome to skoda” when i played with skinning and screening adaptations. Not that easy like it was on MIB2
|
|
|
|
Post by Car Code on Jul 23, 2021 10:53:10 GMT
Not that type of reset.
Connect obd11 to Your car, go to central electrics and choose function "reset".
Be sure You reverted settings/adaptations to stock. After that You can try with options like in VC.
|
|
|
|
Post by stefflimitless on Jul 23, 2021 15:27:53 GMT
Actually i don’t want to do this reset because i did a lot of codings on central electrics.
|
|
|
|
Post by Car Code on Jul 23, 2021 15:44:36 GMT
You won't lose anything. I have done many codings and nothing lost after reset. It is some sort of "power off on" reset. Not removing any codings.
Car does not have memory for factory codings and adaptations, as far as I know.
If You go to the dealer to fix Your proboem they will then flash You factory codings and then You will lose everything You coded.
So first option is to try reset which I explained. And before that reset set problematic changes back to stock.
|
|
|
|
Post by stefflimitless on Jul 23, 2021 18:16:13 GMT
For now i have no problems. I set the skinnings and screenings already back to stock in Functions configuration hmi in 5F.
I will not try again, takes a lot of time to find any correct combination with letters and numbers.
|
|
|
|
Post by stefflimitless on Jul 25, 2021 18:33:52 GMT
Successfully changed the Startup Screen on Infotainment:
Steuergerät 5F
Anpassungen
function_configuaration_hmi
Screenings
0-Welcome to skoda
1-RS
2-Scout
3-Lauren&Klement
10s Power Button (restart)
Others i haven’t tried yet.
FYI: No hood opened, no handbrake pulled, btw i have Amundsen
EDIT: skinning value 1
|
|
|
|
Post by Car Code on Jul 25, 2021 21:47:03 GMT
This does not work on SWING unit. Just deletes animation on other numbers than 0.
Anybod tested on BOLERO to leave feedback?
|
|
