Post by iznam on Jun 26, 2021 7:08:58 GMT
Hi there,
I have activated "Lane assist" by the method described below.
After that the function works fine – car is really trying to keep itself in the lane, there is an icon on dashboard, appropriate item in menu, wheel is vibrating.
BUT! There is a button on lower touch screen (as shown on attached photo). Tricky thing is that the button appears for a split second when MMI starts and then disappears.
It looks like I am missing one item somewhere in Adaptation/Coding. Maybe somebody knows what to do?
I have activated "Lane assist" by the method described below.
After that the function works fine – car is really trying to keep itself in the lane, there is an icon on dashboard, appropriate item in menu, wheel is vibrating.
BUT! There is a button on lower touch screen (as shown on attached photo). Tricky thing is that the button appears for a split second when MMI starts and then disappears.
It looks like I am missing one item somewhere in Adaptation/Coding. Maybe somebody knows what to do?
Unit A5 → Coding
> ALDW_lane_assist - Installed
Unit 5F (мультимедия) → Adaptation
> Car_Function_List_BAP_Gen2
>> LDW_HCA_0x19: activated
>> LDW_HCA_0x19_msg_bus: Terminal 15
> Car_Function_Adaptations_Gen2
>> menu_display_Lane_Departure_Warning: activated;
>> menu_display_Lane_Departure_Warning_over_threshold_high: activated;
Unit 44 → Coding
> Heading Control Assistant: active
Unit 09 → Coding
>> Heading Control config → heading_control
Unit 17 → Coding
> Lane_assist: yes
Unit A5 → Adaptation
> Lane_departure_warning_on_state → Selection_over_menu_default_on
> Personalisation_for_lane_departure_warning: last_settingAttachments:
