|
|
Post by CarActivate on Jun 20, 2021 21:14:07 GMT
Boost Gauge17 Dasboard → Long Coding [LN]_derivative: ** → change to 34
DragMeter 17 Dasboard → Adaptation Displayable_content_configuration: Drag_indicator: no_display → readout Also you can change Upshift_indicator_in_the_centre_display: no_display → display It will be advise to upshift with green arrow at dashboard (when driving at M mode)
|
|
JFY
New Member
Posts: 10
|
Post by JFY on Nov 7, 2022 10:36:23 GMT
Do boost and drag meter actually work? How can I get this to work? I tried searching for this option in VCDS, but don’t see it listed at long coding or adaption?
|
|
|
|
Post by remicar on May 5, 2023 23:02:21 GMT
BOOST - works.
Procedure:
1.17 - Dashboard
2. Long coding
3. Vechicle variant - change the setting to 34.
|
|
JFY
New Member
Posts: 10
|
Post by JFY on May 22, 2023 14:42:23 GMT
I tried to get the drag meter to work, but changing Drag Indicator to "readout" does not change anything? It should be selectable in the list like for example lap timer, right? Or do I need to reset something?
17 Dasboard → Adaptation
Displayable_content_configuration:
Drag_indicator: no_display → readout
|
|
|
|
Post by akbulut27 on May 31, 2023 12:36:56 GMT
Hallo
ich habe bei meine 17 steuergerät nur bis 32 variante ich habe keine 34 variante!!!
was muss ich dann machen das es funktioniert??
|
|
|
|
Post by akbulut27 on May 31, 2023 12:37:32 GMT
BOOST - funktioniert. Vorgehensweise: 1. 17 – Armaturenbrett 2. Lange Codierung 3. Fahrzeugvariante – Einstellung auf 34 ändern . Hallo ich habe bei meinem 17 steuergerät nur bis 32 variante ich habe keine 34 variante!!! Was muss ich dann machen, dass es funktioniert?? |
|
|
|
Post by sm27650 on Sept 19, 2023 8:36:10 GMT
Anyone know what value is needed for an Avant 50 TDI to get the boost working? Value 17 displays both Oil Temp & Boost Pressure; Oil Temp works, but Boost Pressure doesnt work.
|
|
|
|
Post by ash187 on Sept 25, 2023 10:01:29 GMT
BOOST - works. Procedure: 1. 17 - Dashboard2. Long coding3. Vechicle variant - change the setting to 34. Ok so just went and had a look on my 2019 A7 50TDI and it only goes up to 32. I have the sports menu enabled with direct TPMS, power and torque meter working but cannot get the boost to work. My VC part number is 4K0 920 790 A - H10 0215 can someone who has the option for 34 in their VC please list the part number, hardware and software version here? |
|
|
|
Post by safesantos on Oct 4, 2023 12:57:45 GMT
BOOST - works. Procedure: 1. 17 - Dashboard2. Long coding3. Vechicle variant - change the setting to 34. Ok so just went and had a look on my 2019 A7 50TDI and it only goes up to 32. I have the sports menu enabled with direct TPMS, power and torque meter working but cannot get the boost to work. My VC part number is 4K0 920 790 A - H10 0215 can someone who has the option for 34 in their VC please list the part number, hardware and software version here? How did you get the power and torque meter working on '19 model ? |
|
pitty
New Member
Posts: 47
|
Post by pitty on Oct 10, 2023 23:23:48 GMT
Does it work on my21 models?
|
|
|
|
Post by jacksontouran on Oct 16, 2023 7:39:09 GMT
What is drag indicator?
Looks like acceleration test?
|
|
|
|
Post by imihai986 on Jan 27, 2024 8:23:38 GMT
Hello,
For boost I don’t have variant 34. Is just up to 32, and is set to 11.
For Drag indicator I have only: Display or No Display.
With Display setting is not showing Drag indicator
Upshift display is working.
Update:
After changing: Acceleration measurement to Display, I see it in dashboard.
I found that boost is working but not accurate. It displays only at full gas.
|
|
