|
Post by jarkkii on Jun 17, 2021 5:04:12 GMT
Following fault codes
Error codes:
P20C400 - Control of heating agents 3 Short circuit plus
static
U140C00 - Reducer dosing system controller Supply voltage too low
static
U140E00 - Reducer dosing system control unit Operating restriction due to undervoltage
random
P20BC00 - Control of reducing agents heating 1 Short circuit to plus
static
P208D00 - Control of reducing agents pump 1 Short circuit to plus
static
P214E00 - Reducer pump 1 Current too high
random
P20E800 - Reducing agent pressure too low
random
where should i start looking for the problem..? any ideas
|
|
|
Post by adrian2b4u on Jun 25, 2021 15:34:41 GMT
I suspect a bad connection ( wire plug) into the AdBlue pump in the back - and due to the fact that there is no power to the pump you get all the errors. Car needs to be inspected at a car shop at the rear AB tank or the wire loom to be checked.
|
|