VW GOLF 7 GTI change of rear lights from US to UE VER SOFT C

bartekmk7
New Member

Posts: 2

VW GOLF 7 GTI change of rear lights from US to UE VER SOFT C Jun 15, 2021 19:14:29 GMT via mobile

Quote

Post by bartekmk7 on Jun 15, 2021 19:14:29 GMT

Hi All!
I have VW GOLF 7 GTI from USA. I will use it on UE. I have problem with rear lights. I’ve changed rear lights from USA ver to UE ver and here is my question - what should i recode in software coding to use EU ver?

dv52 (Australia)
Moderator

Posts: 6,070

VW GOLF 7 GTI change of rear lights from US to UE VER SOFT C Jun 15, 2021 23:09:42 GMT

Quote

Post by dv52 (Australia) on Jun 15, 2021 23:09:42 GMT

bartekmk7 : The answer is it all depends how you "changed rear lights from USA ver to UE ver"?

The OEM solution would have been to run new wires back to the central electrics module for the new EU style turn-signal lamps. The easier (but non-OEM) solution would have been to use a cross wiring harness that reallocates the US wiring loom to different lamps.

It's not possible to apply the OEM coding solution to a NON-OEM wiring solution and each cross wiring harness requires its own unique coding changes.

Finally, the coding changes also depend on the type of tail lights that were factory fitted to the car AND the type of tail lights that were retrofitted to the car

Don

Last Edit: Jun 15, 2021 23:11:05 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

bartekmk7
New Member

Posts: 2

VW GOLF 7 GTI change of rear lights from US to UE VER SOFT C Jun 16, 2021 6:12:02 GMT via mobile

Quote

Post by bartekmk7 on Jun 16, 2021 6:12:02 GMT

Hello,
I proposed new cables with the layout of the layout of the system.
I don't get to the company with the vocabulary, but we introduce it. Resources were LED lights and I placed normal (incandescent) lights. I have a stop lamp and a side lamp on the left on the pin a71 and on the right side on the pin c8. Professional wires to left with pin a60 and 2 wires wires to right with c31. How to recode these elements?

Old USA

New Europa

0159-Right Lamp 0158-Left Lamp E6-Bcm

Last Edit: Jun 16, 2021 12:57:07 GMT by bartekmk7

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

VW GOLF 7 GTI change of rear lights from US to UE VER SOFT C

Post by bartekmk7 on Jun 15, 2021 19:14:29 GMT

Post by dv52 (Australia) on Jun 15, 2021 23:09:42 GMT

Post by bartekmk7 on Jun 16, 2021 6:12:02 GMT

Shoutbox