nikod
New Member
Posts: 9
|
Post by nikod on May 29, 2021 20:35:42 GMT
Hi!
I replaced the unit from 3Q0 035 824C to 3Q0 035 874C, on my Golf 7.5 2020, after unlocking CP and coding in relation to the previous unit + navi coding, I have only one problem, when I have the ignition on, the icon with the street name disappears on the display MIB.
With the ignition off, the street name icon reappears 
Where is it coded anyone knows?
Best regards!
|
|
|
|
Post by vwjap on May 30, 2021 9:46:26 GMT
Sounds like you don’t have driving modes but your mib is still set up to have them
If you DONT have driving modes look under adaptions and find the car functions adaptions gen2 then find the ones with charisma and make sure there all not activated, then look in car function list bap gen2 and find charisma 0x17 and set that to not active too
|
|
nikod
New Member
Posts: 9
|
Post by nikod on May 30, 2021 15:39:30 GMT
Good advice, I turned it off all charisma adaptation and navi show the names of the streets, with the ignition on. thank you very much!
|
|
|
|
Post by vwjap on May 30, 2021 17:25:52 GMT
Np
|
|
