|
Post by tomschwarz1 on May 24, 2021 9:13:01 GMT
Hello everybody,
I need your help, please. I adjusted the control unit a little on the sunroof and now all basic positions have been adjusted. The sunroof and the roller blind no longer open / close automatically, the roller blind only opens up to 28%. Holding the basic setting run longer with the button does not work either. Even if I open the roller blind manually in the obdeleven, it stops at 28% I made the following change in the control unit, nothing has worked since then. I've already reset the value. Unfortunately, that didn't help either
Control unit: CA Long coding HEX02 Byte 5 bit 1 --> deactivated
Please can you help me to make the roof functional again? Get functional again?
Many Thanks SG Thomas
|
|
|
Post by kokalo on May 30, 2021 12:50:52 GMT
Make factory reset, i think it will help Best regards.
|
|
|
Post by Claudiu on Jun 3, 2021 10:13:33 GMT
Hello everybody, I need your help, please. I adjusted the control unit a little on the sunroof and now all basic positions have been adjusted. The sunroof and the roller blind no longer open / close automatically, the roller blind only opens up to 28%. Holding the basic setting run longer with the button does not work either. Even if I open the roller blind manually in the obdeleven, it stops at 28% I made the following change in the control unit, nothing has worked since then. I've already reset the value. Unfortunately, that didn't help either Control unit: CA Long coding HEX02 Byte 5 bit 1 --> deactivated Please can you help me to make the roof functional again? Get functional again? Many Thanks SG Thomas Did you a backup before coding?
|
|