|
|
Post by tiguan on May 12, 2021 11:31:01 GMT
 Hello I replaced the air conditioning control from the Tigaun Facelift On touch function I had to change something in the long coding so that the climate compressor switched on But my problem is for the rear passengers there is only hot air, no air conditioning Can someone say whether there is also a code for the rear flap position   This Screen will not be shown |
|
|
|
Post by valerka on May 26, 2021 17:22:21 GMT
It maybe the wrong version of control panel that doesn't support rear zone.
I had the same situation. And I changed the panel for European version with SYNC button. After that all functions work correctly now.
|
|
ferre
New Member
Posts: 2
|
Post by ferre on May 27, 2021 15:48:37 GMT
what do you need to code?
i also have a problem that my clima is not cold
|
|
|
|
Post by zabes64 on May 28, 2021 16:04:05 GMT
View AttachmentHello I replaced the air conditioning control from the Tigaun Facelift On touch function I had to change something in the long coding so that the climate compressor switched on But my problem is for the rear passengers there is only hot air, no air conditioning Can someone say whether there is also a code for the rear flap position This Screen will not be shown So it's not just replacing the head unit, there is a sensor that's in the vent portion of the models with the rear control, it's a plug in that likely needs to go to the BCM, but if you're missing that rear sensor, that's likely the cause. |
|
Hello