Post by gpb317 on May 11, 2021 5:05:58 GMT
New OBDeleven user who made multple changes at same time!
Ultimately leading to multiple warning lights and systems disabled!
2017 US spec GLI. I have noticed that OBDeleven seems to have limited functionality on this particular model VW and I likely made a change meant for a different model. In brief, I was attempting to use long coding within Control Module > [03] Brakes to allow deactivation of traction AND stability control.
I basically have no idea what I did but after the change my Break Wear indicator light came on at start up and BRAKE was illuminated in right on speedo side. After a very high speed run 100-120 mph for 10~15 mins after slowing to highway then low speeds multiple lights illuminated!! including:
Traction Control - flashing
ABS - flashing
Tire Press indicator - flashing
steering wheel light (Tach side) - solid
Now ABS is flashing, alternating with flashing traction control (when driving after all faults come up in MFD)
Systems appear to be "off"
I believe the changes were made in mid to late April. I had been having an issue with random misfiring, multiple cylinders. I corrected this with a clean scan after; specifically ENGINE module on scan was without faults. I subsequently made the change for ASC/ESC
Any help is greatly appreciated, in advance
I am hoing to find:
What change did I make to cause this?
How do I corect it?
Is there a way to revert back to stock oor reverse changes?
I am attaching a copy of OBDeleven History. I believe the change was mid to late April 2021, after resolution of random misfires.
Thank you in advance!
History: history12272.txt (231.54 KB)
Ultimately leading to multiple warning lights and systems disabled!
2017 US spec GLI. I have noticed that OBDeleven seems to have limited functionality on this particular model VW and I likely made a change meant for a different model. In brief, I was attempting to use long coding within Control Module > [03] Brakes to allow deactivation of traction AND stability control.
I basically have no idea what I did but after the change my Break Wear indicator light came on at start up and BRAKE was illuminated in right on speedo side. After a very high speed run 100-120 mph for 10~15 mins after slowing to highway then low speeds multiple lights illuminated!! including:
Traction Control - flashing
ABS - flashing
Tire Press indicator - flashing
steering wheel light (Tach side) - solid
Now ABS is flashing, alternating with flashing traction control (when driving after all faults come up in MFD)
Systems appear to be "off"
I believe the changes were made in mid to late April. I had been having an issue with random misfiring, multiple cylinders. I corrected this with a clean scan after; specifically ENGINE module on scan was without faults. I subsequently made the change for ASC/ESC
Any help is greatly appreciated, in advance
I am hoing to find:
What change did I make to cause this?
How do I corect it?
Is there a way to revert back to stock oor reverse changes?
I am attaching a copy of OBDeleven History. I believe the change was mid to late April 2021, after resolution of random misfires.
Thank you in advance!
History: history12272.txt (231.54 KB)