|
Post by njeppo on May 2, 2021 16:05:25 GMT
Hello all, first post and requesting help I'm afraid.
Ordered and received the OBDEleven Pro last week, primarily to activate cruise control on my 2011 8J TT.
All hardware installed and the additional wire has been run between engine ECU and steering column module, but I can't work out how to enable cruise in the OBDEleven apps.
This is the corresponding procedure in VSCD ...
Any help my appreciated, but I am a novice at coding so I don't really understand long coding.
Many thanks in advance
|
|
|
Post by dxdragan on May 20, 2021 11:49:19 GMT
This video has nothing to do with long coding, but my TT has Cruise Control and I found it under: ---------------------------------------------------- - Control Units - 01 Engine - Long coding - Byte 06 - First bit tick (or Add 1) ---------------------------------------------------- For example: Hex 00: Cruise control Not installed Hex 01: Cruise control Installed ----------------------------------------------------
|
|