|
Post by lth0ms0n on May 1, 2021 9:58:23 GMT
Hi all,
Any idea how we can change the units live data displays air conditioning info in?
It’s really frustrating having it stuck in Fahrenheit. I’m surprised that this is the default and it’s so seemingly difficult to change considering it’s connected to a car in the UK and the device itself is European?
If it’s stuck this way then fair enough. I don’t need to know what the temperature is at this moment in time, I’m diagnosing/investigating a heating fault (I know what it is, faulty/clogged matrix) but it would be useful if the data was in a unit I had some comprehension of!
Thanks! Lewis 🚗🚗🚗
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 1, 2021 11:10:13 GMT
If you are using Android then go to Settings half way down is a setting called Units there are two options (Imperial / Metric) choose one that is different to your current setting and see if that solves the issue
If you are using IOS then go Other, Settings and under Units you have Metric and Imperial just change it and see if that helps.
|
|
|
Post by lth0ms0n on May 1, 2021 11:35:07 GMT
I’ve already done that but it hasn’t changed the temperature values.
It might be something I should raise directly with them - it’s very short-sighted to use Fahrenheit only, especially considering there’s only a handful of nations I’m aware of that still use it!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 1, 2021 16:43:39 GMT
Yes use the in app help funtion
|
|