scuba
New Member
Posts: 8
|
Post by scuba on Apr 25, 2021 15:27:19 GMT
Hello,
I set the modification on : 19 Gateway> Adaptation > Start/Stop Voltage Limit > 7,8v to 12V...Doesn't work on my 2,0tdi 150cv DSG 7, the start/stop continues to working.
Have you an idea about that?
Thks
|
|
|
|
Post by doc0427 on Apr 25, 2021 23:05:10 GMT
What year is your vehicle and what region (country) are you in?
2020 and newer NAR Tiguans cannot have the start/stop deactivated with OBDeleven. There are other ways though.
DoC
|
|
scuba
New Member
Posts: 8
|
Post by scuba on Apr 26, 2021 14:21:06 GMT
Hello,
It's the New Tiguan 2021, from Belgium.
What kind of possibilities i have?
thks
|
|
|
|
Post by doc0427 on Apr 26, 2021 16:53:48 GMT
I would suggest that you head over to VWVortex forum and do a search there. Fantastic info there including how-to guides for this. The MQB Tiguan and MQB Jetta are pretty much the same for this topic.
Basically you have 2 options, there’s a small module you can buy or you can disconnect a small connector under the hood. The module is the preferred method.
Cheers...
DoC
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 26, 2021 19:21:29 GMT
Not sure if it applies to your vehicle but just double check.
|
|
|
|
Post by doc0427 on Apr 26, 2021 23:30:18 GMT
Agreed. The module is much preferred and literally takes less than 5 minutes to install.
|
|
scuba
New Member
Posts: 8
|
Post by scuba on Apr 27, 2021 16:07:18 GMT
Thks a lot for your answers !!
i'll check that
|
|
Leon
Closed beta tester
在此处输入您的信息...
Posts: 8
|
Post by Leon on Jun 7, 2022 20:50:45 GMT
Select 19 gateways
Select Long coding
find this option
Sollverbau BDM
Installed to Not installed
The only downside is that the button for the Start/Stop function no longer works.
|
|
