|
Post by ilbabis on Apr 23, 2021 20:47:27 GMT
Hello everybody!
Any info on disabling the break pad warning indicator? I was fiddling about an hour trying info from here and there but couldn't find anything. Car is 2017 FL with digital cluster. I've replaced my brakes and the new pads obviously don't have the connector on them.
|
|
|
Post by dv52 (Australia) on Apr 23, 2021 22:15:37 GMT
Do this (I assume that your hex09 module DOES NOT have an active long-code string):
Go to central electrics module Select Adaptation Enter "HW" into search box and select HW_Verbau Navigate to Brake pad wear and change setting to not installed
If your central electrics module reports an active long-code string - change Byte 4, Bit 7 to 0 (untick)
Don
|
|
|
Post by ilbabis on Apr 24, 2021 8:26:10 GMT
It was exactly like you described it. Worked like a charm ! Thanks Don!
|
|