|
|
Post by daniel1212 on Apr 19, 2021 11:52:06 GMT
I have a Seat Leon 2014 fr with digital cockpit with after marke android head-unit, I have tried resetting the 'inspection and oil' message by following steps :
FIX: Distance covered since last mileage-dependent inspection > new value 0
FIX: Time since last time-dependent inspection > new value 0
also
Go to the Dashboard
Go to Adaptation
Search for "ESI"
Select ESI: Resetting ESI
Change to reset
Exit OBD11 and cycle ignition key
also tried manual via range , but its still shows the reminder!!! (You can see in the attached picture)
Does someone know how to rest it or even disable this massage?? Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 19, 2021 16:33:47 GMT
I personally have a 2014 motor but analogue dashboard and the reset app works fine for me, not sure if the Digital dash has any impact on the coding but the updated facelift rules will be in this thread.
|
|
|
|
Post by daniel1212 on Apr 20, 2021 17:40:43 GMT
Thanks for your reply , but what is listed in the link above do not match the values that appear to me via obd11, For example appears that needs to be changed the 1 - Module 17 - Instrument cluster - Code (25327) but I do not have this option in obd 11.
Anyone have another idea?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 20, 2021 21:40:40 GMT
are you saying you dong have control unit 17
|
|
|
|
Post by dv52 (Australia) on Apr 21, 2021 8:38:11 GMT
Anyone have another idea? daniel: maybe your car uses flexible service intervals? What is the value for the adaptation channel ESI: oil quality on your dashboard module?
Don
|
|
|
|
Post by daniel1212 on Apr 21, 2021 15:12:42 GMT
Hello Don,
It was on low quality and I changed to good quality and now "oil service due!" Appears.
|
|
|
|
Post by dv52 (Australia) on Apr 21, 2021 22:29:58 GMT
BINGO- there's the cause of your problem!!
By changing to "good oil", you have enabled the ESI (Extended Service Interval) group of channels in the Dashboard module. This means that the car no longer uses the FIX adaptation channel group - so resetting the time/distance-traveled channels to zero does nothing!!
To fix your problem, return the setting to "poor quality" (this does not mean that your oil is actually "poor quality) and if the warning is still active go through the reset process again
Don
|
|
|
|
Post by daniel1212 on Apr 22, 2021 12:50:06 GMT
Hi Don,
My mistake, it was already on old oil.
Is there a way to disable a message service?
|
|
|
|
Post by dv52 (Australia) on Apr 22, 2021 20:31:20 GMT
daniel: hmm.... OK - do this: - Go to the dashboard module @ address hex17
- Go to adaptation
- Enter "FIX" into search box
- Either using screenshots, or manually writing - include copies of the settings in a post here for each of the channels
Don
|
|
|
|
Post by daniel1212 on Apr 22, 2021 22:54:37 GMT
Thanks for your help Don, please see the attachments |
|
|
|
Post by daniel1212 on Apr 22, 2021 22:55:27 GMT
|
|
|
|
Post by daniel1212 on Apr 22, 2021 22:56:16 GMT
|
|
|
|
Post by daniel1212 on Apr 22, 2021 22:56:35 GMT
more Attachments:
|
|
|
|
Post by dv52 (Australia) on Apr 23, 2021 22:35:16 GMT
daniel: thanks for the extra information - try this (in order shown): - Reset value for next mileage-dependent inspection > 15000
- Reset value for next time-dependent inspections > 365d
- Resetting ESI> no warning
Don
|
|
|
|
Post by daniel1212 on Apr 25, 2021 8:29:04 GMT
Don: I followed your steps, but the "oil service due!" still appears.
Is there a way to deactivate this massage?
|
|
|
|
Post by dv52 (Australia) on Apr 26, 2021 21:28:32 GMT
huh? Can't believe it!!
Post-up same pictures as above of your current settings, please
Don
|
|
|
|
Post by daniel1212 on Apr 30, 2021 5:24:38 GMT
Hi Don, please find the attached. |
|
|
|
Post by daniel1212 on Apr 30, 2021 5:26:07 GMT
|
|
|
|
Post by daniel1212 on Apr 30, 2021 5:27:13 GMT
|
|
|
|
Post by dv52 (Australia) on Apr 30, 2021 21:34:34 GMT
First try clearing the error message on the dashboard module (@address hex17)
Then reset the value of WIV: Restting ESI
|
|
|
|
Post by daniel1212 on May 2, 2021 6:27:16 GMT
Hi Don,
I did it, but the error comes back again, in fact I do not know what to do with it !!!
|
|
|
|
Post by dv52 (Australia) on May 2, 2021 21:00:01 GMT
daniel: bummer - I'm suspect that your U112100 error is causing the problem - rather than the adaptation channel values.
The problem with this error message is that it is general, rather than specifically identifying a cause.
I assume that you have tried clearing this fault with OBD11?
What can you tell me about this error? Look back through your history records - when did it first appear?
Don
|
|
|
|
Post by daniel1212 on May 15, 2021 21:19:15 GMT
Hi Don,
After an in-depth investigation, I found the problem,
Because I replaced the original head-unit with the Android (After-market) system, the message is displayed in the digital cockpit (instead of inside the system of the head-unit) - so actually this is not really an error!!!
But now, there is another error of the TPMS error message, it is not possible to reset using the Android system.
There is some way to reset this message of "Tire pressure" by obd11?
|
|
|
|
Post by dv52 (Australia) on May 15, 2021 21:54:16 GMT
daniel: I assume that you have tried clearing the TPMS error first with OBD11 by going to the module and using the OBD11 software option before resetting TMPS in the MIB?
If so, you should be able to find a reset TPMS option in basic setting in the Brake module @ address hex 03. CAUTION - DO NOT USE THE RESET TO FACTORY OPTION - this will delete the long-code string in the module and it will result in major problems!
Don
|
|
|
|
Post by daniel1212 on May 15, 2021 22:01:31 GMT
Can you write down step by step how to do this please?
|
|
|
|
Post by dv52 (Australia) on May 16, 2021 6:19:44 GMT
First try this; Go to the Brake module @ address hex03 - select Faults - click-on the clear faults button - go to hex 5F module and reset TPMS facility If above doesn't work Go to the Brake module @ address hex03 - select Basic settings - enter "tire" into search box - select Reset tire pressure monitoring display warnings - run procedure - go to hex5F module and reset TPMS facility
Don
|
|
|
|
Post by daniel1212 on May 17, 2021 21:12:37 GMT
Thanks for the quick and detailed response, There are currently No Faults in the Brake module. In Basic settings -> Reset tire pressure monitoring display warnings What value should be entered in the "Routine Control Option"? In addition, I can not get into hex5F, there is a pop-up "control unit not responding". Please see attached files. |
|
|
|
Post by daniel1212 on May 20, 2021 12:58:59 GMT
Any idea?
|
|
