|
|
Post by aleksandarkg on Apr 16, 2021 17:35:27 GMT
Hello, recently I purchased a kit of folding mirrors.
After installed and coded everything I noticed that when I lock the car, the driver's side mirror folds but the passenger's mirror not, but I unlock my car the driver's side unfolds and the passenger's side folds.
|
|
|
|
Post by dv52 (Australia) on Apr 16, 2021 19:47:41 GMT
Alek: Given that those reading your post have only limited information about your problem, it's difficult to be precise - but my guess is that the DC motor that controls the folding function on the passenger side may be reverse polarized (meaning that the positive and negative voltage wires to the motor might be reversed). You haven't mentioned the passenger side mirror adjustment switches (i.e. mirror up/down, left/right adjustment) - so I assume that these are operating correctly. If so, it means that the separate adjustment motor in the passenger side mirror is correctly wired.
So, I suggest that you check the wiring to the fold-in/out motor - coincidentally (or not?), your colleague posted the wiring diagram on the post before yours
check these connections on V122 and on the door module
Don |
|
|
|
Post by aleksandarkg on Apr 16, 2021 19:58:10 GMT
Thanks a lot so if i reverse wire i want broke anything.
|
|
|
|
Post by aleksandarkg on Apr 16, 2021 19:58:30 GMT
Everything else working fine.
|
|
|
|
Post by dv52 (Australia) on Apr 16, 2021 20:14:16 GMT
alek: As you can see from the wiring diagram pins # 9 and #10 on the 16 x pin connector on the module isn't connected to anything else but V122. So - no, I wouldn't think that you would "broke anything".
This said, the liability that I accept if something goes wrong with my advice EXACTLY equals what you have paid me for that advice- which is nothing!!
Don |
|
|
|
Post by aleksandarkg on Apr 16, 2021 20:17:28 GMT
il try tomorow and tell you what heapend.
Thanks a lot my friend.
|
|
|
|
Post by aleksandarkg on Apr 17, 2021 9:54:02 GMT
You got drink and food my friend .Thanks a lot. everything is sinc,everything working fine .I just need to change pasanger puudle light which is not working.
Thanks a lot aGAIN.
|
|
|
|
Post by aleksandarkg on Apr 17, 2021 9:55:11 GMT
|
|
