|
|
Post by eteller on Apr 1, 2021 14:51:06 GMT
Hi all,
Made some changes with OBD11 over the weekend and managed to take out my cruise control. A quick search shows I'm not the first but none of the threads show how to reverse it/get it back. When I try to change it back to standard (VW) it comes up FAILED. I also adjusted the increased throttle response value and when I now go in to that one ( i tried to revert it as well) it says unsupported. Anybody got any ideas?
|
|
|
|
Post by eteller on Apr 1, 2021 20:17:37 GMT
BTW this is a 2021 GTI SE. After some research on the interwebs it looks like the best course of action is to upgrade to the pro version and clear codes and log code the car back to VW from Audi and that MIGHT work???
|
|
|
|
Post by dv52 (Australia) on Apr 1, 2021 21:34:59 GMT
BTW this is a 2021 GTI SE. After some research on the interwebs it looks like the best course of action is to upgrade to the pro version and clear codes and log code the car back to VW from Audi and that MIGHT work??? eteller: not only is it "the best course of action" - it's the only course of action!! Without the PRO version of OBD11, you can't change any values in long-code
Don
|
|
|
|
Post by eteller on Apr 1, 2021 22:16:34 GMT
Ok, got the PRO version and see in history under engine byte 00 had a hex value of 09 it's now 0A, I cannot change it back I get "Something went wrong try again". I also see I have codes under brakes 03 as well.
Old value: 09 25 00 12 44 24 01 2f 10 00
New Value: 0A 25 00 12 44 24 01 2f 10 00
|
|
|
|
Post by eteller on Apr 1, 2021 22:30:53 GMT
Ok figured it out with the help of member TESTERONLINE's advice in a similar thread. The hood has to be open and the parking brake on and then it took the changes. I cleared the two codes, engine and brakes, shut off and back on and I no longer have a orange cruise warning. Woo hoo!
|
|
|
|
Post by strata on Apr 12, 2021 14:51:05 GMT
you might be interested in watching this video - TLDR you also need to change the ACC module to audi mode |
|
