Post by Deleted on Mar 26, 2021 8:40:42 GMT
Mar 26, 2021 7:56:50 GMT szyszu said:
Hi, thanks for reply.
I saw it, unfortunately there is no A9 (Structure Borne Sound) module available for Leon Cupra. Seems there are some differences in platforms, or it depends on firmware version, hard to say at this point... That really upsets me, I wouldn't buy the car if I knew it will be "snort-farting" like a cheap plastic toy...
Hi, thanks for reply.
I saw it, unfortunately there is no A9 (Structure Borne Sound) module available for Leon Cupra. Seems there are some differences in platforms, or it depends on firmware version, hard to say at this point... That really upsets me, I wouldn't buy the car if I knew it will be "snort-farting" like a cheap plastic toy...
-------------------------
According to Cupra manual
Engine sound*
Depending on the selected profile, it modifies
the acoustic sensation in the vehicle's interior.
Depending on the equipment, it also
modifies the outside sound levels. It acts on
several components of the vehicle to
strengthen or weaken the engine and intake
noise, as well as the noise from the exhaust
system. The configuration is preset for each
profile and can be modified in the Individual
profile.
Depending on the selected profile, it modifies
the acoustic sensation in the vehicle's interior.
Depending on the equipment, it also
modifies the outside sound levels. It acts on
several components of the vehicle to
strengthen or weaken the engine and intake
noise, as well as the noise from the exhaust
system. The configuration is preset for each
profile and can be modified in the Individual
profile.
So as a short term fix go to Individual set the profile up as you want to use the car and disable the horrible sound
I would then speak with support via the in app help function and explain this is the same issue we had with the Formentor (eg conrol unit A9 Not showing) and hopefully they can fix it
