Long coding / found in history

new

« Prev
1
Next »

tihi
New Member

Posts: 2

Long coding / found in history Mar 22, 2021 23:58:03 GMT via mobile

Quote

Post by tihi on Mar 22, 2021 23:58:03 GMT

Hi,
I found in history a long coding between activating the dynamic led(working) and vehicle path display(not working) which I did't do. Does anyone know what does that means?
I have a3 8v 2015, 2.0 tdi.
Thank you in advance.

-------------------------------------------------------------
App
Name: Vehicle Path Display
Old value: OFF
New value: ON
Mileage: 111664 km
Date: 2021-03-22 19:53

---------------------------------------------------------------
Long coding
Control unit: 5F Informacijska elektronika 1
Old value:
01730301FF00000021110001000A00032F00010501000100DE
New value:
01730301FF00000021110001000A00032F00030501000100DE
Mileage: 111664 km
Date: 2021-03-22 19:47

---------------------------------------------------------------
App
Name: Dynamic LED turn signal
Old value: EU OFF
New value: EU ON
Mileage: 111664 km
Date: 2021-03-22 19:44

------------------------------

dv52 (Australia)
Moderator

Posts: 6,064

Long coding / found in history Mar 23, 2021 22:35:08 GMT

Quote

Post by dv52 (Australia) on Mar 23, 2021 22:35:08 GMT

tihi: Hi. The long-code change on the hex5F module altered Byte 18, Bit 1. This is the software switch for the start-up screen on the MMI. If you didn't make the change manually, I suspect the long-code entry is the result of an APP

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

tihi
New Member

Posts: 2

Long coding / found in history Mar 26, 2021 10:43:22 GMT

Quote

Post by tihi on Mar 26, 2021 10:43:22 GMT

Hi Don, thank you.
This is the history of all my changes (same day) and in order were thus made:

1. App: Second phone support
2. App: MIB startup logo (RS3)
3. App: DRL settings in head unit (ON)
4. App: Dynamic LED turn signal (EU ON)
5. App: Vehicle Path Display (ON) - this does not work

So I changed the logo but only via the app, not manually. And manual entry appeared between number 4. Dynamic LED turn signal and 5. Vehicle Path Display. What could be result of manual entry? I would not dare do anything manually.

Thank you.
Best regards,
tihi

Deleted
Deleted Member

Posts: 0

Long coding / found in history Mar 26, 2021 11:12:40 GMT dv52 (Australia) likes this

Quote

Post by Deleted on Mar 26, 2021 11:12:40 GMT

Yes this is a know feature of OBD11 Currently and is on the list to be fixed (hopefully soon).

If you use an APP and that APP makes long code changes you will see in your history the App being used and then shortly after (no idea why the time lag) you get a posting in your history for Long Coding change as well.

Nothing to worry about just a current Feature of the OBD11 History file.

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

yncers: кто ставил дорожные знаки на туарег CR7 Nov 23, 2024 18:26:18 GMT

zuhair3434: Hello, i have golf 1.5ETSI imported used from Denmark to israel, i would like to update navegation, does any one know that? Nov 25, 2024 8:39:23 GMT

flowrider: Black friday sale looking pretty good. Wish there was an option for just credits tho Nov 26, 2024 9:46:40 GMT

whataboutthis: flowrider based on previous years there are more sales to come so fingers crossed for credits for you. Nov 26, 2024 9:51:02 GMT

shoxell: can you help me, i have traffic signs warning on in Audi A4 B9.5 and i cannot turn it off via obd11 because there is no application for this Nov 26, 2024 11:34:36 GMT

luigia3: ho un problema con l animazione fari rs3 su a3 8y ho acquistatp Nov 26, 2024 11:48:10 GMT