OBDeleven history help!

« Prev
1
Next »

Ice maker
Guest

OBDeleven history help! Jan 17, 2017 2:09:42 GMT via mobile

Quote

Post by Ice maker on Jan 17, 2017 2:09:42 GMT

---------------------------------------------------------------
Long coding
Control unit: 52 Door Electronics Passenger Side
Old value:
003A11208E01028000801000
New value:

Mileage: 4206 km
Date: 2017-01-16 23:54

---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Old value:
02730008FF00000051510001000828001F0100D601200102C7
New value:
02730008FF00000051510001000928001F0100D601200102C7
Mileage: 4206 km
Date: 2017-01-16 21:54

---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Values:
byte_13_RDS:
Old value: deactivated
New value: not_deactivated
Mileage: 4206 km
Date: 2017-01-16 21:46

Hi, I love to try out my OBDeleven pro yesterday. But when I check my coding history and following long coding show up. I believe I didn't change anything in 52 passages side door module and new value is empty. I don't seem to understand what is that long coding is for 5F module. I done a quick scan and there is no error but I am not sure about what function or change in those module.

dv52 (Australia)
Moderator

Posts: 6,059

OBDeleven history help! Jan 17, 2017 5:06:40 GMT

Quote

Post by dv52 (Australia) on Jan 17, 2017 5:06:40 GMT

^^^^ ice maker: I'm not sure what has happened in door controller. Try accessing the history report for that module from the page that lists the module - like below

Also, the 5f module, you have changed Byte13, Bit 0 (see my calculation below)- I don't know why this was done and I don't know what this Bit does. You could change it back, via the coding facility if you want

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

Ice maker
Guest

OBDeleven history help! Jan 17, 2017 5:38:09 GMT via mobile

Quote

Post by Ice maker on Jan 17, 2017 5:38:09 GMT

Thanks DV52, I guess my dum question is do you think if I try to turn on RDS as "not-deactivate" in bit 13 and cause the issue? I have no lunck to turn on TMC in my mib2 unit so I think I will reverse back.

---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Old value:
02730008FF00000051510001000828001F0100D601200102C7
New value:
02730008FF00000051510001000928001F0100D601200102C7
Mileage: 4206 km
Date: 2017-01-16 21:54

---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Values:
byte_13_RDS:
Old value: deactivated
New value: not_deactivated
Mileage: 4206 km
Date: 2017-01-16 21:46

And I try to to door control module and just told me the same coding history and still no luck what just happened in there.

dv52 (Australia)
Moderator

Posts: 6,059

OBDeleven history help! Jan 17, 2017 22:39:33 GMT

Quote

Post by dv52 (Australia) on Jan 17, 2017 22:39:33 GMT

Jan 17, 2017 5:38:09 GMT Ice maker said:

Not sure that reversing the RDS bit will change much - enabling TMC is much more complex. Here's my instructions for implementing TMC:

However, the activation code depends on the TMC system that's used in your country - see table below

65535 - TMC OFF
1024 - SUNA Traffic (Intelematics)
0 - dev options
32771 online traffic + VW TMCPro

Don

Last Edit: Jan 17, 2017 22:40:58 GMT by dv52 (Australia)

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT