|
|
Post by patrick1970 on Mar 20, 2021 20:47:25 GMT
Hello everyone I’m new here and this is gonna be my first tread
I build an oem wireless charger in my Audi S3 8V 2016 but I don’t now how to code this and is the place of the wire in the right spot in the BCM(it’s now on pi 14 of the A3 connector
|
|
|
|
Post by dv52 (Australia) on Mar 21, 2021 19:23:29 GMT
patrick:It's just a USB charger - why does it need coding? And what do you mean by "pi 14 on the A3 connector". The BCM has 3 x sockets - which socket? Don  |
|
|
|
Post by patrick1970 on Mar 22, 2021 5:05:07 GMT
It’s not a usb charger it’s a oem Qi charger with a +12v and-
gnd wires 2 wires for the mib and 1 wire for the bcm
|
|
|
|
Post by patrick1970 on Mar 22, 2021 5:07:10 GMT
Pin 14 of the c connector
|
|
|
|
Post by patrick1970 on Mar 22, 2021 8:19:17 GMT
Sorry you call it phonebox
|
|
|
|
Post by patrick1970 on Mar 27, 2021 20:46:48 GMT
Pin 14 was already wired so i solder on that and I activated in the 5F module but he isn’t working the wires yellow/red is on pin 5 and the yellow/bleu on pin 11 on the gray connector in the mib
What do I wrong?
|
|
|
|
Post by patrick1970 on Mar 28, 2021 20:30:59 GMT
Problem solved
To change the wires on the gray connector of the MIB II
|
|
