dcjarne123
New Member
Enter your message here...
Posts: 48
|
Post by dcjarne123 on Mar 20, 2021 13:02:42 GMT
Hello,
I fitted a rain/light sensor but for auto lights i need to get a cable from pin 2 from the rottary switch to bcm C pin 16.
Someone now what for cable i need to buy?
I buyt a 000979025E cable but the pin doenst fit the connector.
Greets, Jarne
|
|
|
Post by dv52 (Australia) on Mar 20, 2021 23:14:15 GMT
This is what I have used in the past (the wire length might need to be extended depending on the route)
|
|