Clearing faults and resolving Front Assist unavailable issue

new

« Prev
1
Next »

lejuice
New Member

Posts: 2

Clearing faults and resolving Front Assist unavailable issue Mar 18, 2021 16:23:28 GMT

Quote

Post by lejuice on Mar 18, 2021 16:23:28 GMT

Hey all,

I took my 2018 Golf R 7.5 to the mountains this weekend where it experienced a bit of snow (nothing crazy, <4"). After I got all the snow off, I noticed a warning message on the dashboard saying "Front Assist Unavailable." I ran a diagnosis and 2 faults came up on module 13 - Adaptive Cruise Control: C110300 twice. I tried clearing it to not avail but then tried again and it worked. I then ran a ACC Recalibration which seemed to have resolved the issue. After driving ~ 5 miles, the warning came back and this time it wasn't as simple to resolve. I've tried clearing it multiple times, to no avail, and am not able to run the Recalibration because there's an issue detected.

I called a couple of local dealers, both of which said that this isn't covered under my warranty and that labor would be 500-700, which is INSANE for what is potentially a misaligned sensor. As far as I can tell, the sensors are seated properly, clean, and free of any obstructions.

Has anyone here been able to successfully resolve this issue without taking it into the dealer?

Happy to provide more information as needed.

newty
Moderator

Grumpy German know it all

Posts: 841

Clearing faults and resolving Front Assist unavailable issue Mar 18, 2021 18:19:58 GMT lejuice and ali77002 like this

Quote

Post by newty on Mar 18, 2021 18:19:58 GMT

The 7.5 ACC is not ment to be calibrated with turning screws and so on.
What exact errors are popping up? Still misaligned?
Make sure the sensor and logo are free of salt, snow and ice. Also make sure that the sensor is correctly snapped in place - maybe remove the logo to be sure.
After that, do a test drive on the most straight roads you can find. Calibration is done "dynamic" - while driving, with nothing to do but to be patient.

Entering static calibration without a calibration field in the workshop will not calibrate the sensor, but will reset learning values, not a good idea...

Please be so kind to set your app's language to English when posting screenshots and before trying out coding suggestions.
This will help everbody to understand and advise.

dv52 (Australia)
Moderator

Posts: 6,057

Clearing faults and resolving Front Assist unavailable issue Mar 18, 2021 21:36:40 GMT lejuice likes this

Quote

Post by dv52 (Australia) on Mar 18, 2021 21:36:40 GMT

lejuice: To add to newty suggestion - while test driving the car you need to actually follow a vehicle in front to establish dynamic calibration. So turn-on ACC (with the error showing) and most important - be patient (as newty says)!

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

lejuice New Member Posts: 2	Clearing faults and resolving Front Assist unavailable issue Mar 18, 2021 21:59:17 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by lejuice on Mar 18, 2021 21:59:17 GMT Thank you both for the recommendations! Let me try doing that over the next few days and see what happens.
	Last Edit: Mar 19, 2021 7:40:16 GMT by Thirsty

unstoned
New Member

Posts: 4

Clearing faults and resolving Front Assist unavailable issue Jan 28, 2023 14:59:22 GMT via mobile

Quote

Post by unstoned on Jan 28, 2023 14:59:22 GMT

Mar 18, 2021 18:19:58 GMT newty said:

Hi, I have the same issue as OP (wonder if he resolved it?) my 2019 alltrack S does not even have ACC, just front assist. Light won’t go away after cleaning from it turning on from snow after a couple weeks. When you say “dynamic calibration” is this a setting on obd11? Or something the car automatically does periodically?

ali77002
New Member

Posts: 2

Clearing faults and resolving Front Assist unavailable issue Feb 15, 2023 9:33:10 GMT via mobile

Quote

Post by ali77002 on Feb 15, 2023 9:33:10 GMT

Mar 18, 2021 18:19:58 GMT newty said:

Thank you for the info, i had an issue with doing basic static settings by mistake, i have tried what you posted, with activating dynamic option on obdeleven, drowe around 30 min and about 35 km and it worked.

duuplo New Member Posts: 2	Clearing faults and resolving Front Assist unavailable issue May 16, 2023 19:06:39 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by duuplo on May 16, 2023 19:06:39 GMT How does one "activate dynamic option on OBDeleven"? Under basic settings, mine only lists static calibration. (I have '19 VW Jetta/GLI 35th Anniv, 6MT w/ Front Assist only.)
	Last Edit: May 16, 2023 19:43:27 GMT by Thirsty

endleesss New Member Posts: 1	Clearing faults and resolving Front Assist unavailable issue Apr 3, 2024 7:22:03 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by endleesss on Apr 3, 2024 7:22:03 GMT Can't clear the error. I tried several times

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

Clearing faults and resolving Front Assist unavailable issue

Post by lejuice on Mar 18, 2021 16:23:28 GMT

Post by newty on Mar 18, 2021 18:19:58 GMT

Post by dv52 (Australia) on Mar 18, 2021 21:36:40 GMT

Post by lejuice on Mar 18, 2021 21:59:17 GMT

Post by unstoned on Jan 28, 2023 14:59:22 GMT

Post by ali77002 on Feb 15, 2023 9:33:10 GMT

Post by duuplo on May 16, 2023 19:06:39 GMT

Post by endleesss on Apr 3, 2024 7:22:03 GMT

Shoutbox