|
Post by vwbrandon2019 on Mar 11, 2021 22:28:25 GMT
Hey folks.
Been playing around with my OBDELEVEN and made an adaption error on my 2019 Golf R.
I was doing the adaption on the Amber Headlight marker lights to deactivate them. But now when I lock my car my passenger side headlight (North American side) blinker doesnt flash when I lock the vehicle. It worked before coding and after coding I didnt have turn signals or daytime running lights on that light. I figured out (I believe) the coding error to get them back but when I locked the car later I noticed that blinker didnt flash but the others did. Can someone lend me a hand in my error. If I have to go back to stock settings, I'm ok with that.
Thanks in advance
|
|
|
Post by dv52 (Australia) on Mar 12, 2021 1:19:32 GMT
vwbrandon2019 : Hi. It's a not unfamiliar problem that we ALL experience occasionally; we believe that we have faithfully followed the tweak instruction - but we subsequently discover that the proverbial loose stools in the brown stuff have collided with the fan blades!!
It's invariably an "Ohh...sh#t" moment, but don't Panic- the fix ain't difficult (usually)!!
Within OBD11 software there is a facility that records ALL the changes that are made including Before and After values. These records are accessible from the History tab on the second screenshot below. You don't even need to be connected to the dongle to access this facility (because the data is stored against your account).
If you want a digital copy of these records, complete the rest of the instructions below (and open the e-mail that you sent to yourself).
Once you have access to the records - simply re-trace your steps and revert the settings to the "old" values
Don
|
|