|
Post by dannyboy123 on Mar 6, 2021 12:53:33 GMT
Does anyone know if it is possible to make the changes to the coding to activate tpms. I've installed the system and sensors but I just wondered if I could use OBDeleven to code it? If it is possible has anyone else done it?
|
|
|
Post by jawagreen on Mar 12, 2021 19:11:42 GMT
Try this
1. Unit 17 (Dashboard) - Long Coding (Byte 11 and Bit 2) or... Unit 17 (Dashboard) - Long Coding - Tyre_Pressure_Monitoring _BAP - active.
2. Unit 5F (Multimedia) - Adaptation - Vehicle menu operation: 1. Menu display rdk - «activated». 2. Menu display rdk clamp 15 off - «not activated». 3. Menu display rdk over threshold high - «activated». 4. Menu display rdk standstill - «not activated». 5. Menu display rdk after disclaimer - «not activated”.
|
|