|
Post by redrs3rocket on Feb 28, 2021 6:31:57 GMT
How can I just have the DRL come on when I unlock instead of the DRLs and Low Beams.
|
|
|
Post by dv52 (Australia) on Feb 28, 2021 20:13:06 GMT
redrs3rocket: Post-up pictures of the complete Leuchte-set (meaning ALL 19 x channels) for Leuchte6ABL LC5 Don
|
|
s111
New Member
HI
Posts: 3
|
Post by s111 on Mar 1, 2021 18:00:59 GMT
Hi, im having an issue where my drl turns off when i turn on my fog lights without my low beams. Is there any coding to sort this issue out? 2017 Seat Ibiza. Thanks
|
|
|
Post by dv52 (Australia) on Mar 1, 2021 21:48:24 GMT
s111: If you "turn on my fog lights without my low beams" - it means that you must have the Parking Lights (side lights) switched-on because the rotary light switch won't permit the fogs to switch-on in any other position. If so, the DRLs are designed to switch-off because you have simulated night-time conditions Don
|
|
ravin
New Member
Posts: 18
|
Post by ravin on Jul 10, 2021 9:32:32 GMT
Hi Don,
Im searching for a way to have my DRL come on when i unlock my car during the day. I saw your answer on the original post but could not understand how to do it. What do I need to change in the Leuchte6ABL LC5?
|
|
|
Post by dv52 (Australia) on Jul 10, 2021 21:40:57 GMT
ravin: OP had a different problem - so Leuchte6ABL LC5 isn't appropriate in your case. What type of DRL lamps does your car have? Don
|
|
ravin
New Member
Posts: 18
|
Post by ravin on Jul 12, 2021 20:17:36 GMT
Hi Don, Thank you for replying. I have the passat B8 GTE with the standard DRL in the bottom were normaly the fog lights are. I already coded my city light to also act as DRL. Both also stay on when i have my low beams on and with the comming home and leaving home feature.
I already tried to do it by adding at B2 the lightfunction for interior or footlight or surrounding light (light in the mirror for puddles). But it had no effect. Am i forgetting to do something else?
|
|
|
Post by dv52 (Australia) on Jul 12, 2021 22:31:55 GMT
ravin: Making LED type DRLs do as you want is tricky because of power supply limitations in some of the fittings used by the manufacturer. But if you want to experiment (might not work), post-up screen-shots of the COMPLETE Leuchte-sets for Leuchte2SL VLB10 and Leuchte4TFL LB4, To be clear, I need to see ALL 19 x adaptation channels for each Leuchte-set
Don
|
|
ravin
New Member
Posts: 18
|
Post by ravin on Jul 13, 2021 7:20:39 GMT
Hi Don Is this what you were looking for? These are my current settings. I hope you have an idea how to get what i want. Im all out off it. Do you know if it is possible to use Leuchte31AMBL 1C61 select de light module en light function from their? This one seems to be not active for me, but dont know of it is because these are extra or because i dont of an option in my car. Then i could try that as my last option. Otherwise i have no idea and you would be my last hope .
|
|
|
Post by dv52 (Australia) on Jul 13, 2021 22:44:21 GMT
ravin : So, as I said - this is a bit of a guess because I'm not sure of the DRL power supply capabilities in your fittings. Try this (central electrics module) for the left side DRL only: - Leuchte2SL VLB10-Lichtfunktion B 2 > Aktive Blinkfunktion hat ein auf 1 gesetztes zugeordnetes Bit in pa_dynamisch_blinken
- Leuchte4TFL LB4-Lichtfunktion B 4 > Aktive Blinkfunktion hat ein auf 1 gesetztes zugeordnetes Bit in pa_dynamisch_blinken
- Außenlicht_Blinker
- ZV_Blinken_auf > active
- ZV_Blinken_zu > active
[/ul] Don
PS: something odd about your current settings!! Have you previously modified these Leuchte-sets? Do the Coming/Leaving Home and Single Side Parking Light functions work on the left-side DRL?
|
|
ravin
New Member
Posts: 18
|
Post by ravin on Jul 15, 2021 6:52:04 GMT
Hi Don I managed to find the last part under Dyn. Turn signal: I tried the full setup you mentioned before for the DRL to come on when i unlock/lock my car during the day. What happens now is when I unlock and lock the top DRL come on for a second when the turnsignals are flashing for the optical confirmation but then goes off after that second. The bottom DRL still does nothing. The good thing is that it does something when I unlock/lock, but not yet exaclty what i want. Do you have another idea? To come back on your previous question. I did modify my city lights to come on with my DRL. Which i call my top DRL. My single side parklichts work fine during the day. I havent checked what it does at night. I never use them, but i will check it to be sure if it works properly. Hopefully you will be able to help me with those top and bottom DRLs to come on when i lock/unlock. I have seen a lot of other topics where you were able to make other people happy with you solutions. So if there is someone that can come up with a solution it must be you
|
|
|
Post by dv52 (Australia) on Jul 15, 2021 20:54:50 GMT
yes, the effect that you describe is what the tweak is meant to do; flash the DRL with the turn-signal when you lock/unlock the car. What do you want the DRLs to do?
|
|
ravin
New Member
Posts: 18
|
Post by ravin on Jul 20, 2021 20:16:24 GMT
|
|
|
Post by s2artfraser on Mar 28, 2022 9:49:18 GMT
Hi DV52, Audi S3 8Y - 1. During the Day - How can i have the day DRL on when i unlock the car for a timed value then off when i lock the car 2. At night - How can i have CH/LH function when i lock/unlock the car for a timed value
thanks Stuart
|
|
|
Post by dv52 (Australia) on Mar 28, 2022 20:31:07 GMT
s2artfraser : hmm......Aren't you requesting a form of CH/LH in your (1) question ? The first part of (1) is really LH function in daytime - AFAIK, this is not possible because LH is triggered by the the light-sensor, so it's an after-dark thing.
About (2) question - does your car have a light sensor fitted to the windshield?
|
|
|
Post by s2artfraser on Mar 28, 2022 21:19:27 GMT
Hi DV52 The reason I ask is I have activated using the app CH/LH function during the day. However it only works when it's a bright day. If its dark it also works but if it is somewhere in between the function doesn't work. Hope you can help Thanks Stuart
|
|
|
Post by s2artfraser on Mar 30, 2022 15:38:31 GMT
Hi I think that the answer could be setting the light sensor and I am trying to modify light sensor EINSCHALTGRENZE_CHO_LHO and the value is 600lx.however OBD will only let me enter a value between 0-255. Can you please let me know how to modify it. Thank you Stu
|
|
|
Post by dv52 (Australia) on Mar 30, 2022 22:03:33 GMT
PLEASE DO NOT DOUBLE-POST THE SAME QUESTION - see the forum rules
I've answered your question in your other post in "general questions"
Don
|
|