|
Post by nicvail on Jan 10, 2017 14:32:58 GMT
Hi,
Can someone tell me how to make my gauge cluster lights always ON at 100% when my lights are OFF or on Parking Lights position please?
I often drive with my Parking Lights ON only at dusk or dawn, but my cluster lights are OFF and I can't see anything but my red needles. The numbers in white can't be seen. It's annoying.
Thanks,
Nic
|
|
|
Post by ari007 on Jan 10, 2017 16:06:41 GMT
1, Select Dashboard 2. Security Access 3. If your mk7 is pre MY16, enter 20103. If the vehicle is MY16, or later, enter 25327 (note: As far as I'm aware, 25327 is the only known security code for MY16 Dash Board modules - and this code only works on the adaptation channel for this tweak) 4. Select Adaptation 5. Search for Illumination_algorithm and select Scale_switching_algorithm 6. Change existing setting, parking_light to lds 7. Enact changes by pressing the green-tick
Credits to Don for this
|
|
gzf
New Member
Posts: 6
|
Post by gzf on Dec 2, 2019 5:12:00 GMT
1, Select Dashboard 2. Security Access 3. If your mk7 is pre MY16, enter 20103. If the vehicle is MY16, or later, enter 25327 (note: As far as I'm aware, 25327 is the only known security code for MY16 Dash Board modules - and this code only works on the adaptation channel for this tweak) 4. Select Adaptation 5. Search for Illumination_algorithm and select Scale_switching_algorithm 6. Change existing setting, parking_light to lds 7. Enact changes by pressing the green-tick Credits to Don for this My 18' Golf has the whole dash illuminated when in off/parking light mode by default. If i were to switch it from lds to parking_light would that do something weird or just reverse things?
|
|