Post by Reihenmotor5 on Feb 22, 2021 12:28:30 GMT
Per Mantas's request:
Single Side Parking Light
About app
Single Side Parking Lights are used to make a parked car more visible. When parked on the street where other drivers might not expect it, or to make the front and rear of your car more visible while parallel parked.
Function
Single Side Parking Lights can be activated with the turn signal on and ignition off. Push the stalk towards the direction of your car that is exposed to the street to activate Single Side Parking Lights.
Attention
According to some countries law, parking at night without leaving on your sidelights is illegal in certain circumstances. It’s much safer to leave your car near a road with activated single side parking lights.
Coding:
Controller 9 Central Electronics
Security code
Adaptations
Find Aussenlicht_uebergreifend
Parklicht ueber LSS aktiviert
Old Value: not_active
New Value: single sided
Still in Controller 9
Find the following Leuchte entries
Leuchte20BR LA71-Lichtfunktion F 20 == Parklicht links (beidseitiges Parklicht aktiviert li & re)
Leuchte20BR LA71-Dimmwert EF == change from 0 to 127 (or value of your liking)
Leuchte21BR RC8-Lichtfunktion F 21 == Parking light rechts
Leuchte21BR RC8-Dimmwert EF == change from 0 to 127 (or value of your liking)
Front and rear lights are engaged to the side you flick your turn signal stalk towards so that the street facing side of your car is illuminated by the front and rear lights so your car can be seen by cars.
Sorry that the Atlas is dirty, but this is how the lights on the rear show when SSPL is engaged. Only the outer tail is on and the lights are in a vertical presentation not horizontal when the tail lights are normally running.
Better pic if an Atlas specific image is used/needed for the one-click app.
*I suspect that this will work on the newer model Atlas, as Leuchte channels are pretty much the same on the MQB platform.
Single Side Parking Light
About app
Single Side Parking Lights are used to make a parked car more visible. When parked on the street where other drivers might not expect it, or to make the front and rear of your car more visible while parallel parked.
Function
Single Side Parking Lights can be activated with the turn signal on and ignition off. Push the stalk towards the direction of your car that is exposed to the street to activate Single Side Parking Lights.
Attention
According to some countries law, parking at night without leaving on your sidelights is illegal in certain circumstances. It’s much safer to leave your car near a road with activated single side parking lights.
Coding:
Controller 9 Central Electronics
Security code
Adaptations
Find Aussenlicht_uebergreifend
Parklicht ueber LSS aktiviert
Old Value: not_active
New Value: single sided
Still in Controller 9
Find the following Leuchte entries
Leuchte20BR LA71-Lichtfunktion F 20 == Parklicht links (beidseitiges Parklicht aktiviert li & re)
Leuchte20BR LA71-Dimmwert EF == change from 0 to 127 (or value of your liking)
Leuchte21BR RC8-Lichtfunktion F 21 == Parking light rechts
Leuchte21BR RC8-Dimmwert EF == change from 0 to 127 (or value of your liking)
Front and rear lights are engaged to the side you flick your turn signal stalk towards so that the street facing side of your car is illuminated by the front and rear lights so your car can be seen by cars.
Sorry that the Atlas is dirty, but this is how the lights on the rear show when SSPL is engaged. Only the outer tail is on and the lights are in a vertical presentation not horizontal when the tail lights are normally running.
Better pic if an Atlas specific image is used/needed for the one-click app.
*I suspect that this will work on the newer model Atlas, as Leuchte channels are pretty much the same on the MQB platform.
