|
|
1.4.6
Feb 19, 2021 7:16:46 GMT
Post by Til on Feb 19, 2021 7:16:46 GMT
Use the following format to report bugs
Description of bug: your bug description
iOS software version: your IOS version
Phone: your apple phone model
Car: your vehicle brand, model and year
User email: your user email of the OBDeleven application.
Changelog
v1.4.6
- Improved ODX request generation in Basic Settings for UDS control units
- Removed the ability to add a vehicle in garage view due to security reasons. The function will remain available only for developers and moderators
|
|
|
|
1.4.6
Feb 22, 2021 19:50:55 GMT
Post by oll1954 on Feb 22, 2021 19:50:55 GMT
Hi!
Yesterday I became aware of that my second car, the Honda CR-V 2006, had an ODB11 port. I was not aware of that Honda was not a supported vehicle, so I plugged in the dongle, entered the VIN, and the app replied with "Honda". So far so good, I thought. I then started the scanning. The following observations could be made:
1. As my iPhone was a business phone, the screen was from security reasons automatically locked after 5 minutes (this could not be changed). When the screen locked, the scanning "session" stopped. To continue the scanning I had to unlock the screen by entering the pincode.
2. A total number of 221 modules were scanned (approx. 15 for each "scanning session", see point 1 above). Apparently the scanning was successful -> 0 problems for module after module were reported (even if I know I have an alternator problem).
3. However, these 221 modules being scanned did not belong to my Honda, but my Audi e-tron. "Night vision" is not a feature of the Honda 2006 ...
4. When the scanning after approx. 15 "sessions" was completed with 0 problems found, I got the message "scanning unsuccessful, please try again" or something like this.
Questions;
- Why couldn't the scanning continue even if the screen of the phone is locked?
- Why couldn't the app (from the entered VIN) tell right away that the vehicle is not supported instead of indicating "Honda", leaving me to belive that scanning could be (successfully) started?
Best regards, Ola
|
|
Deleted
Deleted Member
Posts: 0
|
1.4.6
Feb 22, 2021 20:22:52 GMT
Post by Deleted on Feb 22, 2021 20:22:52 GMT
oll1954 its been a while since i used this feature but it is very buggy I am afraid. When I raised the issue a while ago it was confirmed that Honda and Porche are not supported as the OBD2 connection is pinned differently to other vehicles, but you are correct it does not tell you.
|
|
