|
|
Post by myb7a4 on Jan 8, 2017 20:38:57 GMT
How to disable seatbelt warning chime for B7? I follow the coding instruction from this forum but can't access the channeling step (dash board > adaptation).
|
|
|
|
Post by CyberDJ on Jan 10, 2017 19:18:51 GMT
How to disable seatbelt warning chime for B7? I follow the coding instruction from this forum but can't access the channeling step (dash board > adaptation). Hi Controll unit 17 Change the 4th digit (?) xxx?x Let the x digits original I changed my unit to 3 Alarm only for 6sec That's perfected Regards CyberDJ |
|
|
|
Post by myb7a4 on Jan 12, 2017 4:23:57 GMT
How to disable seatbelt warning chime for B7? I follow the coding instruction from this forum but can't access the channeling step (dash board > adaptation). Hi Controll unit 17 Change the 4th digit (?) xxx?x Let the x digits original I changed my unit to 3 Alarm only for 6sec That's perfected Regards CyberDJ How do I get into adaptation from the Dash Board icon setting to change the digit? It's asks for a channel # but channel 17 is not recognize. Also where is this Control unit you mentioning? Thanks |
|
|
|
Post by myb7a4 on Jan 19, 2017 1:40:45 GMT
For those who is having a difficult time like myself.
Connect to obd11
Click the Dash Board (17) icon and select coding
In coding screen you should see valve numbers xxxxxx and new valve to enter.
My valve was 0023268 (seatbelt warning every 30 seconds)
My new valve is now 0023208 (no seatbelt warning).
Hope this helps
|
|
|
|
Post by anakondakz75 on May 23, 2021 12:06:00 GMT
Audi A4 b7 8ec
Does anyone know how I can activate an audible signal for not wearing a seat belt ... It's very strange to me, because the light comes on after a contact is made and then goes out after about 3-4 seconds. Whether I put on the seat belt, it goes out .. In my opinion this is not normal .. I can code not to light the light, but I want it to work as I guess it should be ..
At the moment I have 00130...
|
|
|
|
Post by nazcar on Aug 13, 2021 21:04:00 GMT
When entering the dashboard module coding doesn’t show up only adaptation, can anyone help?
|
|
|
|
Post by dylanasp on Nov 5, 2021 17:12:15 GMT
Same issues. No coding option in the dashboard window. I’m using an IPhone and the only options are the basic settings and adaptations. Anyone able to figure this out?
|
|
|
|
Post by greganomics on Jun 15, 2023 3:37:39 GMT
I also bought this OBDeleven device to disable the seatbelt alarm. I am using the app on my iPhone and have spent hours trying to change “any” setting to no avail. So far it has only read and cleared codes which isn’t what I bought it for. I would really like some OBDeleven support in using this device for what it advertised it could do.
2005 Audi A4 Avant
|
|
mgs73
New Member
Posts: 2
|
Post by mgs73 on Nov 20, 2023 15:08:12 GMT
Same issue here, no coding or long coding options, and can’t figure out how to change anything in adaptations? Did anyone solve this issue?
2008 Audi A4
|
|
mgs73
New Member
Posts: 2
|
Post by mgs73 on Jan 20, 2024 19:43:30 GMT
Anyone able to figure this out?
|
|
