Description of Bug
Please note these are all offline issues so no dongle was involved.
Firstly just to confirm two users have confirmed the bug fix listed above works so thank you
Secondly we have an issue with KWP2000 Control units and viewing Basic Settings.
When I look at cars in my garage with a KWP2000 Control unit (cars from 2005 / 6) then in Android there is no basic settings shown offline but when I go to IOS there is a menu item however unlike the CAN setup when you select it the error message Not Availiable offline comes up.
Third, Did a backup using old dongle (as new one is currently being replaced) and then compared the single backup data between Android and IOS.
Differences
Left rear ABS wheel speed sensor on Android had Air Gap as 7mm but IOS has blank
Right rear ABS wheel speed sensor on Android had Direction of rotation as forwards, but IOS has Blank
Brake system sensor on Android has Brake pressure sensor 1 at 0.30bar but on IOS Blank
Vacuum sensor on Android as -1001 mbar but IOS was blank
Traction control system sensor on Android as Longitudinal acceleration sensor as -0.37278 m/s2 but blank in IOS
Steering angle sensor and Steering angle sensor, offset straight line running both showing -474.469 on Android but blank on IOS.
I could give many more differences but bottome line from a single backup the output shown is different between the two systems.
I have double checked and both applications have the units set as Metric as that can cause issue.
Fourth
From the same Control Unit 03 backup please note the adaptation count agrees with underlying data.
The Advanced ID shows 32 items but the underlying data shows 33, the missing item is AUTOSAR Standard application software id
The Live data count shows 51 items but the underlying data shows 54, the missing items are Analysis 104, Prevented stop processes (ring memory), Analysis 105
IOS software version: IOS 14.4
Phone: Iphone 6s
Car: seat leon cupra 280 - the best
User profile: cupra280.co.uk
