|
|
Post by elduderino on Feb 10, 2021 18:11:19 GMT
Hi
2018 T6
I have the latest OBDeleven Pro . on iOS14.
When I try to use 09 central electrics/Adaptations , there are no adaptations listed. Just a page asking for a channel between 0-255
All the other control units /Adaptations have got lists.
Can anyone help with this please.
Regards
|
|
|
|
Post by tintim on Feb 11, 2021 12:32:43 GMT
Same, I believe its always been like this on this control unit
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2021 13:22:46 GMT
There is a bug with IOS in that it does not display the Channel name, Values or Description for TP2.0 KWP2000 Protocol Please raise this with support via the in app help function Firstly remember that the details that you see in the app are all created by users so they may be incorrect. When I log on to Control Unit 09 (offline) with a 2017 Van I get the following details using Android.
Channel Number
| Channel Description
| | 001 | Remote control adaptation
| | 003 | Auto unlock
| | 004 | Auto unlock
| | 006 | Selective door locking
| | 007 | Auto lock/unlock for rear lid
| | 008 | Visual comfort closing confirmation
| | 009 | Audible unlocking confirmation
| | 011 | Audible locking confirmation
| | 012 | Visual locking/unlocking confirmation
| | 014 | Alarm horn country setting
| | 020 | Comfort turn signals
| | 021 | Emergency brake light flashing
| | 022 | Parking lights
| | 023 | Front wiper service position
| | 024 | Alaarm horn (terminal 15)
| | 026 | Front wiper tear wiping
| | 027 | Parking light with terminal 15
| | 028 | Rear wiper comfort wiping
| | 032 | Cornering light, speed threshold (max)
| | 033 | Cornering light, steering angle threshold
| | 034 | Cornering light steering angle off threshold
| | 037 | Cornering light, brightness
| | 038 | Interior light switch off delay
| | 039 | Lunotto termico
| 040
| Mirror heater time
| 043
| Comfort turn signals (cycles)
| 044
| Timeout before tear wiping
| 046
| Coming home / leaving home
| 047
| Coming home time
| 048
| Leaving home time
| 053
| High Beam Assist
| 054
| Sprung hi/lo beam stalk
| 060
| Interior monitoring sensitivity
| 061
| Inclination sensor sensitivity
| 099
| Factory mode
|
This is all I can see
Adaptations:
Adaptation channel 00 Clear Learned Values "This Channel resets/clears all learned Remote Controls".
Adaptation channel 01 Remote Control Adaptation
Adaptation channel 03 Central Locking: Auto-Lock
The doors will lock automatically when the vehicle reaches a speed of 15 km/h or 10 mph.
Range: 0 = OFF / 1 = ON
Adaptation channel 04 Central Locking: Auto-Unlock
The doors will unlock automatically when the key is removed from the ignition switch.
Range: 0 = OFF / 1 = ON
Adaptation channel 06 Central Locking: Selective (Single) Door Locking
0 = All Door Locking
1 = Selective (Single) Door Locking
Adaptation channel 07 Central Locking: Auto-Lock/Unlock for Rear Lid
Locks the Rear Lid once a Speef of 5 kph is reached.
0 = Auto-Lock/Unlock for Rear Lid inactive
1 = Auto-Lock/Unlock for Rear Lid active
Adaptation channel 08 Visual Comfort Operation/Closing Confirmation
Turn Signals as Comfort Operation/Closing Confirmation.
0 = Visual Comfort Operation Confirmation inactive
1 = Visual Comfort Operation Confirmation active
Adaptation channel 09 Central Locking: Audible Unlocking Confirmation
Alarm Horn as Unlocking Confirmation
0 = Audible Unlocking Confirmation inactive
1 = Audible Unlocking Confirmation active
Adaptation channel 11 Central Locking: Audible Locking Confirmation
Alarm Horn as Locking Confirmation
0 = Audible Locking Confirmation inactive
1 = Audible Locking Confirmation active
Adaptation channel 12 Central Locking: Visual Locking/Unlocking Confirmation
Turn Signals as Locking/Unlocking Confirmation.
0 = Visual Locking/Unlocking Confirmation inactive
1 = Visual Locking/Unlocking Confirmation active
Adaptation channel 14 Anti-Theft: Alarm Horn (Country Setting)
The Alarm Horn Country Setting alters the Type/Lenght and Volume of the Alarm Tone (please obey all applicable laws).
0 = Frequency modulated with 10 Tamper Alarms
1 = Frequency modulated with 1 Tamper Alarm
Adaptation channel 20 Lights: Comfort Turn Signals
0 = Comfort Turn Signals inactive
1 = Comfort Turn Signals active
Note: See Channel 43 for the Number of Cycles.
Adaptation channel 21 Lights: Emergency Brake/Hazard Light Flashing
Flashes the Hazard Lights in case of an Emergency Braking
0 = Emergency Brake/Hazard Light Flashing inactive
1 = Emergency Brake/Hazard Light Flashing active
Adaptation channel 22 Lights: Parking Lights
0 = Parking Light Function inactive
1 = Parking Light Function active
Adaptation channel 23 Wipers: Front Wiper Service Mode/Position
0 = Front Wiper Service Mode inactive
1 = Front Wiper Service Mode active
Adaptation channel 24 Anti-Theft: Alarm Horn (Terminal 15)
0 = Alarm Horn with Terminal 15 inactive
1 = Alarm Horn with Terminal 15 active
Adaptation channel 26 Wipers: Front Wiper Tear Wiping
0 = Front Wiper Tear Wiping inactive
1 = Front Wiper Tear Wiping active
Adaptation channel 27 Lights: Parking Light with Terminal 15
0 = Parking Light with Terminal 15 inactive
1 = Parking Light with Terminal 15 enabled
Adaptation channel 28 Wipers: Rear Wiper Comfort Wiping
Activates the Rear Wiper when engaging Reverse Gear while the Front Wipers are active/running.
0 = Rear Wiper Comfort Wiping inactive
1 = Rear Wiper Comfort Wiping active
Adaptation channel 43 Lights: Comfort Turn Signals (Cycles)
Range: 1...5
Standard: 3
Adaptation channel 60 Anti-Theft: Interior Monitoring Sensitivity
Adaptation channel 60 Alters the Interior Monitoring Sensitivity to prevent False Alarms.
Range: 100...200 (50...100 %)
Resolution: 20 %
Adaptation channel 61 Anti-Theft: Inclination Sensor Sensitivity
Alters the Inclination Sensor Sensitivity to prevent False Alarms.
Range: 100...200 (50...100 %)
Resolution: 20 %
Adaptation channel 99 Factory Mode
Adaptation channel 99 The Factory Mode is being used to visualize Errors to the Workers during the Production and can once it's being deactivated not be reactivated again.
0 = Factory Mode inactive
1 = Factory Mode active
|
|
|
|
Post by elduderino on Feb 11, 2021 16:43:29 GMT
Hi testeronline
Many thanks for the informative reply.
I have contacted OBDeleven support.
Regards
|
|
|
|
Post by elduderino on Feb 20, 2021 10:15:35 GMT
Hi testeronline
I have had no reply from tech support.
I also have to put in the VIN number every time I use the device, & although tech have tried to sort that, they ain’t succeeded.
Would I be better getting a cheap Android Tablet?
Regards
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 20, 2021 10:56:52 GMT
elduderino, I am afraid there is a large backlog of things to be fixed along with major projects (SFD and BMW) so I am afraid i would not expect any quick turnaround to this issue. For ease of use I am afraid the answer is yes you are better off getting a cheap Android or Huawei device, just make sure the Android version is above 5 and preferably above 9. With regards to the Vin that is strange. Firstly there was a new IOS Release yesterday I would try that. Secondly I would remove and re-install OBD11 if above does not work and maybe try creating a brand new account (just for testing) and see if it picks up the vehicle and saves the details correctly.
|
|
|
|
Post by elduderino on Feb 20, 2021 13:28:12 GMT
|
|
|
|
Post by elduderino on Feb 20, 2021 13:34:43 GMT
Hi testeronline
You clever boy(or girl). Just updated the app , & it hasn’t asked for the VIN.
Think I will still get the tablet, if it suits.
Regards
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 20, 2021 13:41:16 GMT
Tablet looks good to me.
Its got Bluetooth, WIFI and being a new one I would expect a higher version of andoid.
The only possible issue is it appears to only work on WIFI so if you are not near you home wifi make sure you IOS phone can create a hotspot to share you mobile connection.
|
|
|
|
Post by elduderino on Feb 20, 2021 13:44:18 GMT
Many thanks testeronline
|
|
|
|
Post by elduderino on Feb 23, 2021 14:59:08 GMT
Hi testeronline
Just received the tablet
Have logged into my OBDeleven account. But the tablet will not connect via Bluetooth to the device.it can see it listed but will not connect whether I use 0000 , or 1234.
I have tried network connections reset, & even a factory reset.
Have made sure tablet has latest updates.
Can you advise
|
|
|
|
Post by elduderino on Feb 23, 2021 15:05:28 GMT
Hi testeronline
Hold fire, I have just found a system update for the tablet.
Will report back
|
|
|
|
Post by elduderino on Feb 23, 2021 15:26:05 GMT
Update made no difference.
Tablets Bluetooth will not connect to the device.
The app can see the device.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2021 22:24:22 GMT
elduderino sorry been out on the road for the day. What version of Android is it running. Have you got the tablet talking to your home wifi so you have internet connection and do you have location set on your tablet
Is your dongle the white one (so you should pair it or black one (it does not need to be paired)
|
|
|
|
Post by elduderino on Feb 24, 2021 6:09:14 GMT
Hi testeronline
It’s Android 9. The Bluetooth is 4.2.
The dongle is the Black one.
Thanks for mentioning the tablets location settings,
they were set to deny. I have corrected it.
I have been using my iPhones hotspot for the wi-fi internet, but
I will get the Van nearer the house , & try the house router.
It’s 6.08am at present, so will try later, & report back.
Regards
|
|
|
|
Post by elduderino on Feb 24, 2021 8:19:07 GMT
Yr done it again testeronline . It was the location settings.
Well done.
Works the same as the iPhone, but still no Adaptions list in Central electrics. So it must be a T6 thing.
Regards
Ps, pleased with the tablet though. Lol
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2021 9:43:15 GMT
Good news on the tablet,
What year is your T6 AS THE ONE i have in my Garage does display the details under adaptions.
I will stick some pictures up on how I get to see them later today.
|
|
|
|
Post by elduderino on Feb 24, 2021 12:55:31 GMT
It’s 2018 (68 plate) Highline
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2021 16:56:54 GMT
|
|
|
|
Post by elduderino on Feb 24, 2021 18:09:49 GMT
Excellent
Couldn’t be more helpful .
|
|
|
|
Post by klemzy on Oct 18, 2021 16:07:54 GMT
Can someone tell me what does this mean? Control unit -Transmission - reset. I am using OBD eleven. VW Caravelle 2016 2.0 150 DSG  |
|
