|
|
Post by alexaudifr on Feb 1, 2021 17:29:38 GMT
Hello , I search the code for the option : Front daytime lights during unlocking phase " DAY " I saw video ,but no code or help on this option, anyone can help me ?  I have the LH/CH but this option work only the night and with DRL + headlights ..I want the DRL/LED only with unlocking phase in daytime not only the night . Here the video :
Thanks in advance for sharing Alex |
|
|
|
Post by alexaudifr on Mar 3, 2021 19:00:23 GMT
Up ! If anyone can help me for this code.
|
|
|
|
Post by dv52 (Australia) on Mar 3, 2021 20:33:19 GMT
Alex- Hi. It really depends on how "full" the Leuchte-set for the DRL is - as factory programmed. Please post-up pictures of ALL 19 x adaptation channels for Leuchte2SL VLB10
Don
|
|
|
|
Post by alexaudifr on Mar 5, 2021 21:39:45 GMT
Hi Don, Maybe a lichtfonktion to modify ?   |
|
|
|
Post by dv52 (Australia) on Mar 6, 2021 2:56:40 GMT
Alex: thanks for the pictures - it's just as I thought; your Leuchte-set is full!!. If you want this function, you will need to give-up some existing light functions on these lamps.
Currently, your lamp does: DRL Parking Light Coming/Leaving home DRL wink (lamp is dimmed when blinker is activated) Single Side Parking Light
If you wish to proceed, please give these functions a score as to the functions you prefer to keep (score =1 to 5, with 5 the most wanted). I assume that DRL score=5 and Parking Light score=4 - not sure of the rest?
Don
|
|
|
|
Post by alexaudifr on Mar 6, 2021 9:19:53 GMT
Hi Don,
Thanks i understand now how it work for fonction set.
I don't really use the sigle side parking light.
Alex
|
|
|
|
Post by dv52 (Australia) on Mar 6, 2021 21:41:32 GMT
OK-Try this:
Leuchte2SL VLB10 and Leuchte3SL VRB21:
Lichtfunktion E > Blinken links Dunkelphase (tagfahrlicht) Lichtfunktion F > Blinken rechts Dunkelphase (not active) Dimmwert EF > 0 (100) Dimming Direction EF > minimize (maximize)
Lichtfunktion G > Aktive Blinkfunktion hat ein auf 1 gesetztes zugeordnetes Bit in pa_dynamisch_blinken (Blinken links/rechts aktiv (beide Phasen)) Lichtfunktion H > tagfahrlicht (not active) Dimmwert GH >100 (70) Dimming Direction GH >maximize (minimize)
In central electrics module - in Adaptation - if your vehicle is pre MY16 search for Dynamische Blinkmodi, for post MY16 cars, search for Außenlicht_Blinker- select the following channels and change settings:
- ZV_Blinken_auf > active (nicht aktiv)
- ZV_Blinken_zu > active (nicht aktiv)
Values in brackets are your existing settings (in case you need to revert to original)
Don
|
|
|
|
Post by alexaudifr on Mar 8, 2021 12:41:20 GMT
Hi Don,
It's not work, only little flash led when open the car with zv_bliken active.
Maybe this fonction is not the good :
Lichtfunktion G ? My audi is pré fl 2015 with full led(not exactly the same as the video )
With the modification code the "Single Side Parking Light" is still active
Thanks for your help
Alex
PS:maybe a modif on this menu "Dynamische Blinkmodi"?
|
|
|
|
Post by dv52 (Australia) on Mar 8, 2021 20:05:38 GMT
alexaudifr OOPs - my bad, You are perfectly correct!! In my obsession to figure-out how I could retain as many of your existing light-functions as possible, I forgot about the second part of the tweak
I'ii modify my original instructions
Don
PS: yes, Lichtfunktion G > Aktive Blinkfunktion hat ein auf 1 gesetztes zugeordnetes Bit in pa_dynamisch_blinken
PPS: Yes, I was able to figure-out a way to keep Single Side Parking Light active
|
|
|
|
Post by alexaudifr on Mar 8, 2021 23:03:34 GMT
Hi Don, Thanks for the help. I tried earlier with the tweak settings, with the options activated in "dynamish Blinkmodi" but only a flash of the led bar and turn signal when I unlock the car, they do not stay on after . Can we modify the tweak so that the leds stay on? PS: I also noticed that the graduation of the blinker and the led only works at 100, it looks like we cannot lower the value (maybe I was wrong) I will retry tomorrow |
|
|
|
Post by alexaudifr on Mar 9, 2021 19:16:16 GMT
Hi Don,
I re tried, but only flash led actived(few seconds ) , there are not stay on after unlock the car
Maybe an other lux during fonction ?
|
|
|
|
Post by alexaudifr on Mar 9, 2021 19:43:23 GMT
.
|
|
|
|
Post by dv52 (Australia) on Mar 9, 2021 23:23:13 GMT
alex: I don't understand- your Leuchte-sets have coming/leaving home active. When you lock/unlock the car, why doesn't this function keep the LEds on?
|
|
|
|
Post by alexaudifr on Mar 10, 2021 9:07:46 GMT
Hi Don, Yes the code look like good, but just un impulsion of the drl. This is my code, i just modify the dimmwert for test the graduation of the drl   |
|
|
|
Post by dv52 (Australia) on Mar 10, 2021 21:29:08 GMT
Alex: Did you have the rotary light switch to AUTO position and have you set CH/LH to active on the MENU?
|
|
|
|
Post by alexaudifr on Mar 11, 2021 0:16:47 GMT
Hi Don, Yes position auto and ch /lh activated. The ch/lh work the night like before. It's strange, the code give only 1 flash of the drl/led when i unlock the car. I wanted to send vidéo but the size it's too big for the forum. I saw an other leuchte, check the screen shot below :  |
|
|
|
Post by dv52 (Australia) on Mar 11, 2021 19:26:58 GMT
Alex: Leuchte4TFL LB4 in your picture is the power supply for Leuchte2SL VLB10 (and Leuchte5 TFL RB32 is the same for Leuchte3SL VRB21 on the right-side). I wouldn't have thought it necessary to change the power-supply Leuchte-sets because the ignition isn't switched-on when you lock/unlock the car.
But you could try replicating my instructions for Leuchte2SL VLB10 on Leuchte4TFL LB4 (i.e. change both Leuchte-sets) and see what happens
Don
|
|
I have the LH/CH but this option work only the night and with DRL + headlights ..I want the DRL/LED only with unlocking phase in daytime not only the night .
