baws
New Member
Posts: 18
|
Post by baws on Jan 31, 2021 7:21:49 GMT
I enabled the Lock/Unlock acoustic confirmation via the app. But nothing happened on my Tig 2018.
Do I have to do something in the car to activate this?
|
|
|
Post by aussietig on Feb 1, 2021 7:02:00 GMT
Probably tick it in the MMI
|
|
baws
New Member
Posts: 18
|
Post by baws on Feb 3, 2021 13:47:11 GMT
Strangely not visible there either. Must it be rebooted? How do I reboot? 🤣
|
|
|
Post by ap2703 on Feb 24, 2021 12:03:32 GMT
SAME PROBLEM , I ACTIVATE ONLY ENTRY AND AFTER AGAIN BOTH = 30 CREDITS IN TOTAL
|
|
casi
New Member
Posts: 7
|
Post by casi on May 6, 2021 17:52:49 GMT
After activating this option, i entered in the car settings on media and checked acoustic feedback in menu.
|
|
owler
New Member
Posts: 2
|
Post by owler on May 8, 2021 20:07:14 GMT
I cant get this function working either. Does the Tig need to have an alarm fitted as mine doesnt for this to work?
|
|
|
Post by dv52 (Australia) on May 11, 2021 20:09:31 GMT
hmmm............... don't use the App; it's overpriced, it makes changes to the car's coding database that are not disclosed and in the cases above - it doesn't seem to work!! If you have a PRO account - do this instead: Lock/Unlock Acknowledgement - Instructions:
There are 2 x separate procedures for this tweak: OBD11 procedure which involves selecting/changing up to 6 x adaptation channels in the hex09 module & In-car procedure
OBD11 Procedure:
- Select Central Electrics module @ address Hex09
- Select Security access and enter the magic number 31347
- Select Adaptations and search-for and select Acknowledgement signals
- Select active for Akustische Rueckmeldung entriegeln if you want an acoustic signal when car is unlocked (2 x beeps). Else leave as not active
- Select active for Akustische Rueckmeldung verriegeln if you want acoustic signal when car is locked (1 x beep). Else leave as not active
- Select active for Akustische Rueckmeldung global
- Select kurtz for Dauer der Akustischen Rueckmeldung vom Einfachhorn for a short sound, or select normal (not much difference IMO between these two settings)
- Select active for Menuesteuerung akustische Rueckmeldung (this places an ON/OFF switch for the acoustic signal function in the car menu - see "In-car Procedure")
- If the car is fitted with an anti-theft alarm siren, select not active for Akustische Rueckmeldung Signalhorn- if the native car horn is to be used for the lock/unlock acoustic signal, select active.
- Shut-down OBD11 software and remove dongle -cycle ignition key and go to "In-car Procedure".
Note: "Select active/not active/kurtz/normal" above means -select the option and then confirm the change by clicking on the green, circled-tick on the bottom of the OBD11 screen
In-car Procedure:- Press the CAR button on the escutcheon panel on the RHS of the infotainment unit
- Select SETUP on the bottom RHS of the screen (looks like a cog - but this requires a good imagination!
) - Select Opening & closing panel
- Place a tick in Acoustic confirmation box - the acoustic feedback facility can be turned ON/OFF via this switch
Don
|
|
radua
New Member
Posts: 2
|
Post by radua on Jun 8, 2021 11:31:42 GMT
I managed to code this, but for somereason the sound is from the Alarm, is there any way to use the Horn and not the alarm? Thank you!
|
|
baws
New Member
Posts: 18
|
Post by baws on Aug 9, 2021 5:29:08 GMT
Thank you very much! Very appreciated
I will def try "In-car procedure" and get back to you.
|
|
|
Post by Ashman663 on Aug 9, 2021 19:56:21 GMT
Hello, does this work even if the car isn’t fitted with factory alarm system?
Regards Ashman663
|
|
|
Post by mauro72 on Aug 10, 2021 6:41:25 GMT
Hello does anybody know how to reduce the time of the sound? I would want to have it shorter and i don't know where (and if) I can do it.
Thank you
|
|
|
Post by djkasmic on Oct 3, 2021 19:47:16 GMT
The sound works on my car, but there is no tick box at the cars menu. Activated it in
8. Select active for Menuesteuerung akustische Rueckmeldung (this places an ON/OFF switch for the acoustic signal function in the car menu - see "In-car Procedure")
Restarted the car and the MMI
|
|
|
Post by aiispace on Oct 6, 2021 16:05:51 GMT
I forgot I had this activated on my Tiguan and when I resetted to factory defaults the infotainment system, it started to work.
|
|
|
Post by lcg1982 on Sept 28, 2023 13:15:47 GMT
In my audi a3 8v the sound just works for closing the car, but not for openning hmmm............... don't use the App; it's overpriced, it makes changes to the car's coding database that are not disclosed and in the cases above - it doesn't seem to work!! If you have a PRO account - do this instead: Lock/Unlock Acknowledgement - Instructions:
There are 2 x separate procedures for this tweak: OBD11 procedure which involves selecting/changing up to 6 x adaptation channels in the hex09 module & In-car procedure
OBD11 Procedure:
- Select Central Electrics module @ address Hex09
- Select Security access and enter the magic number 31347
- Select Adaptations and search-for and select Acknowledgement signals
- Select active for Akustische Rueckmeldung entriegeln if you want an acoustic signal when car is unlocked (2 x beeps). Else leave as not active
- Select active for Akustische Rueckmeldung verriegeln if you want acoustic signal when car is locked (1 x beep). Else leave as not active
- Select active for Akustische Rueckmeldung global
- Select kurtz for Dauer der Akustischen Rueckmeldung vom Einfachhorn for a short sound, or select normal (not much difference IMO between these two settings)
- Select active for Menuesteuerung akustische Rueckmeldung (this places an ON/OFF switch for the acoustic signal function in the car menu - see "In-car Procedure")
- If the car is fitted with an anti-theft alarm siren, select not active for Akustische Rueckmeldung Signalhorn- if the native car horn is to be used for the lock/unlock acoustic signal, select active.
- Shut-down OBD11 software and remove dongle -cycle ignition key and go to "In-car Procedure".
Note: "Select active/not active/kurtz/normal" above means -select the option and then confirm the change by clicking on the green, circled-tick on the bottom of the OBD11 screen
In-car Procedure:- Press the CAR button on the escutcheon panel on the RHS of the infotainment unit
- Select SETUP on the bottom RHS of the screen (looks like a cog - but this requires a good imagination!
) - Select Opening & closing panel
- Place a tick in Acoustic confirmation box - the acoustic feedback facility can be turned ON/OFF via this switch
Don
|
|