|
|
Post by lordzelix on Jan 17, 2021 19:35:35 GMT
So when it's on original my turn signals work fine
In all licht stands
When i change the brightness to 20,40,60 or 80
My turn signals stop working any suggestions?
Also when i start my car my fog lights are always on
So i think the previous owner has this enabled
But i cant seem to find a wqy to get it back to stock.
Any suggestions?
|
|
|
|
Post by dv52 (Australia) on Jan 17, 2021 21:19:29 GMT
lordzelix : Can't diagnose problem without more information. Post up a complete copy of one of the Leuchte-sets for the front turn signal (meaning all 19 x channels). Use either pictures or a written list. If you want us to look at the fog light problem as well- do the same with one of the Leuchte-sets Don
|
|
|
|
Post by lordzelix on Jan 18, 2021 20:33:45 GMT
How do i do this im pretty new to this
Sorry
|
|
|
|
Post by lordzelix on Jan 18, 2021 20:52:11 GMT
|
|
|
|
Post by dv52 (Australia) on Jan 18, 2021 22:08:41 GMT
lordzelix : OK, your picture explains why the fog-lights "are always on" - it's because they are programmed to be DRLs
Do this:
Leuchte12NL LB45-Lichtfunktion B 12 and Leuchte13NL RB5-Lichtfunktion B 13 - change to nicht aktiv
As for your turn-signal lamps, I don't know why they were programmed as in your picture (really odd) - but I note that your car appears to have incandescent lamps and it appears to have US style blinkers. The problem with non-LED turn-signal lamps with US style blinkers is that the lamp holder overheats and it can melt if you use an illumination level higher than 50 for the DRL/Parking-light function.
Anyhow, I suggest that you pre-program the turn-signal Leuchte-sets like this:
Leuchte 0 BLK VL B36
Lichtfunktion A 0 > Tagfahrlicht
Lichtfunktion B 0 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Dimmwert AB 0 > 50 (Don't increase this value higher than 50)
Lichtansteuerung HD AB 0 > always
Lichtfunktion C 0 > Blinken links Dunkelphase
Lichtfunktion D 0 > nicht aktiv
Dimmwert CD 0 > 0
Dimming Direction CD 0 > minimize
Lichtfunktion E 0 > Blinken links Hellphase
Lichtfunktion F 0 > nicht aktiv
Dimmwert EF 0 > 100
Dimming Direction EF 0 > maximize
Lichtfunktion G 0 > nicht aktiv
Lichtfunktion H 0 > nicht aktiv
Dimmwert GH 0 > 0
Dimming Direction GH 0 > maximize
Leuchte1BLK VRB20
Lichtfunktion A 1 > Tagfahrlicht
Lichtfunktion B 1 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Dimmwert AB 1 > 50 (Don't increase this value higher than 50)
Lichtansteuerung HD AB 1 > always
Lichtfunktion C 1 > Blinken rechts Dunkelphase
Lichtfunktion D 1 > nicht aktiv
Dimmwert CD 1 > 0
Dimming Direction CD 1 > minimize
Lichtfunktion E 1 > Blinken rechts Hellphase
Lichtfunktion F 1 > nicht aktiv
Dimmwert EF 1 > 100
Dimming Direction EF 1 > maximize
Lichtfunktion G 1 > nicht aktiv
Lichtfunktion H 1 > nicht aktiv
Dimmwert GH 1 > 0
Dimming Direction GH 1 > maximize
If you want to change the turn-signal lamp illumination: Don
|
|
|
|
Post by lordzelix on Jan 18, 2021 22:41:36 GMT
I uploaded 1 of the fog light set and 1 of the turn signal set if im not mistaking 4 pictures total?
|
|
|
|
Post by dv52 (Australia) on Jan 18, 2021 22:57:04 GMT
hmmm......... my bad. I've changed my response above to include the turn-signal
Don
|
|
|
|
Post by lordzelix on Jan 18, 2021 23:00:52 GMT
Very much appreciated!
Do you know where i can find a list with all the original coding tho?
|
|
|
|
Post by dv52 (Australia) on Jan 18, 2021 23:08:27 GMT
lordzelix: It's difficult to find a "complete list" because there are so many variations across different model mk7, different light fitting options and different country of sale Don PS: I've made more changes to my response above
|
|
|
|
Post by lordzelix on Jan 20, 2021 17:31:18 GMT
Thanks man, just configured them today
Works like a charm,
But im not really sure what you mean with the last section but anyhow thanks!
If you want to change the turn-signal lamp illumination:
for the Blinker function - alter the value of Dimmwert EF
for the DRL/Parking-light function - alter the value of Dimmwert AB (but not higher than 50)
|
|
|
|
Post by dv52 (Australia) on Jan 20, 2021 20:35:48 GMT
What I mean is that as per my new Leuchte-programming, your turn signal lamps operate in 3 x modes as: - Blinkers
- Daytime Running Lights (DRLs) - during sunlight hours
- Parking Lights (maybe you call these "Position Lights") - during night-time hours
[/ol][/ul] You can change the illumination of each of these light functions separately like this: - for light function (1) above - alter the value of Dimmwert EF
- for light function (2) and (3) above - alter the value of Dimmwert AB (but DON'T use a value higher than 50, or you will melt the lamp base)
Don
|
|
|
|
Post by fsound on May 13, 2021 4:53:58 GMT
Good night, I have a Volkswagem nivus 2021 mqb platform and installed the fog light on pins 3 and 40 of the bcm according to the manual, in addition to the channel codes, is it necessary to press the new button? Or the fog function? If the answer is yes, where do I find this function to activate! Thank you very much in advance!
|
|
|
|
Post by dv52 (Australia) on May 13, 2021 19:42:41 GMT
fsound: I don't think that I can help - my wiring diagrams that i Have for MQB platform vehicles have the front fogs connected to pins 5 and 45 on socket B of the BCM. And the front fog lights are operated by pulling-out the center part of the rotary light switch (which VW calls "LDS"). To enable this switch, the BCM adaptation channel Außenlicht_uebergreifend-LDS_mit_Nebellicht needs to be set to "yes".
But if your nivus doesn't have a rotary light switch with a center-pull part, then it likely wont have the LDS channel above
Don
|
|
