Post by marius on Jan 14, 2021 2:19:53 GMT
1) Thread title:
VW T-Cross, 2019, CH/LH Lights via Low Beam/Fog Lights
2) The content inside a thread of one-click app request must contain this information:
Vehicle
- VW T-Cross 2019
One click app name
- CH/LH Lights via Low Beam/Fog Lights
App description
- This app will activate CH/LH feature via Fog lights or Low Beams (usually stock setting).
Control unit
- Central Electrics 09
Function
- Adaptation
Procedure
:
(Left/ Right Low beam CH/LH function cancel)
Central Electrics 09
Adaptations
Channel: Leuchte6ABL LB44
Values:
Light_Function_B_6 ( From Coming_Home_Leaving_Home To not_activ )
Channel: Leuchte7ABL RB5
Values:
Light_Function_B_7 ( From Coming_Home_Leaving_Home To not_activ )
__________________________________________________________________________
(Switching to fog:)
Central Electrics 09
Adaptations
Channel: Außenlicht_uebergreifend
Values:
Coming home Leughten ( From "Low beam" to "Fog light")
__________________________________________________________________________
(Adding left/ right fog light CH/LH function)
Central Electrics 09
Adaptations
Channel: Leuchte12NL LB40
Light_Function_C_12 ( From not_activ To Coming_Home_Leaving_Home)
Channel: Leuchte13NL RB3
Light_Function_C_13 ( From not_activ To Coming_Home_Leaving_Home)
__________________________________________________________________________
(Adding left/ right fog light dimming for the added CH/LH functions- this is a MUST to be added since LEDs require different dimming value than stock halogens and also because the new functions that we added have no dimming and the car computer does not know what signal to use to control them)
Central Electrics 09
Adaptations
Channel: Leuchte12NL LB40
if
Value (from the car unit):
-Type_Of_Load_12 = "AllgemeineScheinwerfer" then set (the car has this value from factory)
-Dimming_CD_12 ( From “0” to “100” halogens ) (then all we do is to activate the corect dimming for the stock/factory halogens)
Else if
-Type_Of_Load_12 = "LED Lichtmodul" then set (but if the car has this value- let's supose that someone used the other app and retrofitted LED modules instead of factory halogens)
-Dimming_CD_12 ( From “0” to “127” led) (then we set the correct dimming for the LEDs)
___________________________________________________________________________
(and now for the right fog)
Central Electrics 09
Adaptations
Channel: Leuchte13NL RB3
if
Value (from the car unit):
-Type_Of_Load_13 = AllgemeineScheinwerfer then set
-Dimming_CD_13 ( From “0” to “100” halogens )
Else if
-Type_Of_Load_13 = LED Lichtmodul then set
-Dimming_CD_13 ( From “0” to “127” led)
I hope everything is clear now
VW T-Cross, 2019, CH/LH Lights via Low Beam/Fog Lights
2) The content inside a thread of one-click app request must contain this information:
Vehicle
- VW T-Cross 2019
One click app name
- CH/LH Lights via Low Beam/Fog Lights
App description
- This app will activate CH/LH feature via Fog lights or Low Beams (usually stock setting).
Control unit
- Central Electrics 09
Function
- Adaptation
Procedure
:
(Left/ Right Low beam CH/LH function cancel)
Central Electrics 09
Adaptations
Channel: Leuchte6ABL LB44
Values:
Light_Function_B_6 ( From Coming_Home_Leaving_Home To not_activ )
Channel: Leuchte7ABL RB5
Values:
Light_Function_B_7 ( From Coming_Home_Leaving_Home To not_activ )
__________________________________________________________________________
(Switching to fog:)
Central Electrics 09
Adaptations
Channel: Außenlicht_uebergreifend
Values:
Coming home Leughten ( From "Low beam" to "Fog light")
__________________________________________________________________________
(Adding left/ right fog light CH/LH function)
Central Electrics 09
Adaptations
Channel: Leuchte12NL LB40
Light_Function_C_12 ( From not_activ To Coming_Home_Leaving_Home)
Channel: Leuchte13NL RB3
Light_Function_C_13 ( From not_activ To Coming_Home_Leaving_Home)
__________________________________________________________________________
(Adding left/ right fog light dimming for the added CH/LH functions- this is a MUST to be added since LEDs require different dimming value than stock halogens and also because the new functions that we added have no dimming and the car computer does not know what signal to use to control them)
Central Electrics 09
Adaptations
Channel: Leuchte12NL LB40
if
Value (from the car unit):
-Type_Of_Load_12 = "AllgemeineScheinwerfer" then set (the car has this value from factory)
-Dimming_CD_12 ( From “0” to “100” halogens ) (then all we do is to activate the corect dimming for the stock/factory halogens)
Else if
-Type_Of_Load_12 = "LED Lichtmodul" then set (but if the car has this value- let's supose that someone used the other app and retrofitted LED modules instead of factory halogens)
-Dimming_CD_12 ( From “0” to “127” led) (then we set the correct dimming for the LEDs)
___________________________________________________________________________
(and now for the right fog)
Central Electrics 09
Adaptations
Channel: Leuchte13NL RB3
if
Value (from the car unit):
-Type_Of_Load_13 = AllgemeineScheinwerfer then set
-Dimming_CD_13 ( From “0” to “100” halogens )
Else if
-Type_Of_Load_13 = LED Lichtmodul then set
-Dimming_CD_13 ( From “0” to “127” led)
I hope everything is clear now