|
Post by karlitos on Jan 10, 2021 0:23:50 GMT
Can anybody help me?
I would like to know how to do dynamic effect of the turn signal when opening and closing the car as the video below.
I heard it is simple, just put it to flash twice when close the car. The problem is that I don't know where to change this parameter.
Thanks in advance.
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Jan 11, 2021 3:04:52 GMT
Hi, check in here:
Module 09 Central Electrics
Adaptations
Go into “Aussenlicht blinker”
Set these values to Active:
- ZV_Blinken_zu - ZV_Blinken_auf
Also, you might see in the video the lights are kind of going too fast, you can go into the “Acknowledgment signals” adaptation and check these values:
ZV-Blinken_Hellzeit: 300 ms ZV-Blinken_Dunkelzeit: 300 ms ZV-Blinken_Abschluss_Dunkelzeit: 300 ms
The factory setting should be 300 ms. Hope that helps.
|
|
|
Post by karlitos on Jan 16, 2021 0:06:32 GMT
Thank you so much 2018gti It works perfectly! I made a video to demonstrate the different times of action:
|
|