|
Post by audib9 on Dec 29, 2020 15:16:25 GMT
I ordered a Push Button driver door electrical tailgate for Audi A4 8W from Kufatec. It arrived with a cable, but no plan on how to connect the 3 wires to the connector in the driver’s side door. All 3 wires are white. One is probably plugged into the connector (it has an end) the other two wires are free and you are probably connecting to the already existing cables on the connector.
Does anyone have a diagram of how I connect these three wires. On which connector in the door on the driver's side and on which connector number. Thanks
|
|
|
Post by tommybatista on Jan 5, 2021 8:28:14 GMT
Hi audib9, connect as follows: - pin 1 button --> ground - pin 2 button --> ground - pin 3 button --> pin 4 of 32 pin connector on the door module (illumination) - pin 4 button --> pin 23 of 32 pin connector on the door module (signal) 32 pin connector should have a light blue case, it's the first starting from the left, looking the door modules frontally Bye
|
|
|
Post by audib9 on Jan 5, 2021 17:34:53 GMT
Thank you very much
|
|