|
Post by dmonies on Dec 27, 2020 21:27:55 GMT
So I recently got the service inspection light on my Audi. I change the oil, inspected the vehicle and reset the reminder via OBDEleven but now I always get a notification that service is due (starting from 10,000mi). I would like the reminders to start showing at a less mileage like 2,000miles or something. How can I do this?
I looked around and noticed some other people having the problem but there weren't any solutions (in the VW MKVII section). I might have no inconsistencies in the numbers, can anyone here take a look real quick and tell me if something isn't right.
SIE: min value driving distance = 14500km SIE: max valule driving distance = 145000km SIE: max value of time between inspections = 730d SIE: distance driven from inspection = 0km SIE: time from inspection = 0d SIE: oil quality = poor SIE: soot entry = 0km SIE: remaining distance = 16000km SIE: remaining running time = 365d
SIA: maximum value of distance to service = 16000km SIA: maximum value of time to service = 365d
FIX: max distance unit next mileage related inspection = 32032km FIX: max time until next time inspection = 730d FIX: distance covered since last mileage-dependent inspection = 36km FIX: time since last time-dependent inspection = 0d FIX: reset value for next mileage dependent inspection. = 15000km
|
|
exxon
New Member
Posts: 6
|
Post by exxon on Feb 7, 2021 16:30:47 GMT
I’m having a similar issue on my B9 Quattro Avant.
I’ve changed oil/filter/air filter/pollen filter/sparks and ATF oil change.
The built in workshop app for resetting the service interval just gets stuck in a never ending loop of “activating” but never finishes.
Has anyone had any luck resetting their service inspection on the B9 platform using the app? Or does anyone know how to reset it kissing adaptations?
Cheers
|
|