|
Post by kenraali on Dec 23, 2020 17:40:50 GMT
Hi! how do i only get the LEDs on when the parking brake is on?
|
|
|
Post by dv52 (Australia) on Dec 23, 2020 20:47:46 GMT
@kenraalii: which LEDs are you referring to?
Don
|
|
|
Post by kenraali on Dec 26, 2020 14:48:15 GMT
|
|
|
Post by dv52 (Australia) on Dec 27, 2020 7:51:45 GMT
kenraali: Try this: Leuchte3SL VRB21-Lichtfunktion F 3 and Leuchte2SL VLB10-Lichtfunktion F 2 - ONLY if the current setting on your car is nicht aktiv, change to Handbremse ist angezogenDon
|
|
|
Post by kenraali on Dec 28, 2020 15:51:19 GMT
dv52 (Australia) the LEDs just brightened up with handbrake but the headlights did not go out.
|
|
|
Post by dv52 (Australia) on Dec 28, 2020 20:58:53 GMT
kenraali : hmm.......... OK, I didn't understand that you also wanted the "headlights out" - by which I assume that you mean the low-beams? To add this extra function try this:
Leuchte6ABL LC5 and Leuchte7ABL RB1 Lichtfunktion E >Handbremse ist angezogen (not active) Dimming Direction EF > minimize (maximize) Note: the values above in brackets should be your existing settings - don't make these changes unless the current settings are as shown
Don
|
|