|
|
1.4.2
Dec 22, 2020 14:53:05 GMT
Post by Thirsty on Dec 22, 2020 14:53:05 GMT
Use the following format to report bugs
Description of bug: your bug description
iOS software version: your IOS version
Phone: your apple phone model
Car: your vehicle brand, model and year
User email: your user email of the OBDeleven application.
Changelog
v1.4.2
- Fixed an issue that some users received “Failed to update” message when trying to update device firmware. Now application may ask you to unplug and plug the device again if needed.
- Fixed an issue of K-Line connectivity, when app could not connect to some K-Line control units. This might have resulted full scan stuck for some users.
- History items made with different ODX file/version than the currently selected one will be displayed correctly.
- Fixed an issue where application internal storage gets filled over time. This might have resulted in device storage ran out of space.
|
|
Deleted
Deleted Member
Posts: 0
|
1.4.2
Dec 22, 2020 15:45:35 GMT
Post by Deleted on Dec 22, 2020 15:45:35 GMT
Description of bug
After I had seen on the web that a new release was available I checked the app and as you can see it tells me I am on the latest release.
Just to double check I re booted the phone and checked again, still tells me I am on the latest release
As you can see below when I ask to check it shows there is an update
IOS software version: IOS 14.1 Phone: Iphone 6s Car: seat leon cupra 280 - the best User email: cupra280.co.uk |
|
|
|
1.4.2
Dec 23, 2020 9:44:06 GMT
Post by melvin on Dec 23, 2020 9:44:06 GMT
Bug report
iOS 14.2
iPhoneX
Car: 2016 Audi A6 C7.5 (1.8 Ultra TFSI)
Description of bug #1: Gateway List changes returns 'Gateway list rejected'
Tried using different service modes, with/without engine running, with bonnet open, etc. All unable to modify gateway list.
Description of bug #2: Unable to set 'Confirmation of installation changes' in MIB2
Edit Update (8th Jan 2021)
1. I found the reason why it shows rejected - because some selected items are invalid
2. The cause of (1.) is due to the gateway list being completely WRONG. Items/channel IDs are all messed up. Activating one channel in the list for example turning on #19 isn't really #19, but will turn on another channel for example 5F and so on.
I tested this with multiple channels and I have to rework my whole gateway list one-by-one to remap them.
Please fix this faulty list !
|
|
|
|
1.4.2
Dec 26, 2020 20:41:54 GMT
Post by Carmaffia on Dec 26, 2020 20:41:54 GMT
Bug report
iOS 14.2
iPhone6s
Car: 2015 Golf GTE
Bug: When backup (Gateway) app chrashes.
|
|
Deleted
Deleted Member
Posts: 0
|
1.4.2
Jan 7, 2021 18:37:10 GMT
Post by Deleted on Jan 7, 2021 18:37:10 GMT
description of bug: Did a full backup using Android. When I go to IOS Version can see the backup. Selecting the backup and try to email it - nothing happens Selecting history and filter by Full Backup only and try to email that and app just spins and then eventually crashes. Update, tried it again this morning and it did not work, however left the phone and came back later and it then brought up the share feature. This process has got very slow and I can see on the screen how I know its actually running (there is no circle)
Based on screen review the output under adaptions is incorrect, just double checked the Extract and it shows the correct value so its a screen only issue. Example under control unit 01 - Adaptions according to the backup file (which I cant email to see if its the same Remember this is just one backup just viewed via different operating systems.
In both cases the Settings has the System set to Imperial. If I change the IOS To Metric then it matches the Android version IOS Screen shot from backup
| Android Screen shot from backup
|  |  |
then I went into adaptions offline in IOS and got these screen shots, as you can see these values match the Android output from the backup and not the IOS Backup view. Exhaust bank 1
| Intake bank 1
| Other intake bank 1
| Other Exhaust bank 1
|  |  |  |  |
IOS software version: IOS 14.1 Phone: Iphone 6s Car: seat leon cupra 280 - the best User email: cupra280.co.uk |
|
Deleted
Deleted Member
Posts: 0
|
1.4.2
Jan 10, 2021 22:23:29 GMT
Post by Deleted on Jan 10, 2021 22:23:29 GMT
Description of Bug
As you can see its still showing control unit 33 which is only applicable to non VAG Cars where its the only control unit.
IOS software version: IOS 14.1
Phone: Iphone 6s
Car: seat leon cupra 280 - the best
User email: cupra280.co.uk
|
|
|
|
1.4.2
Jan 11, 2021 5:29:33 GMT
Post by OBDeleven on Jan 11, 2021 5:29:33 GMT
Bug report iOS 14.2 iPhoneX Car: 2016 Audi A6 C7.5 (1.8 Ultra TFSI) Description of bug #1: Gateway List changes returns 'Gateway list rejected' Tried using different service modes, with/without engine running, with bonnet open, etc. All unable to modify gateway list. Description of bug #2: Unable to set 'Confirmation of installation changes' in MIB2 Edit Update (8th Jan 2021) 1. I found the reason why it shows rejected - because some selected items are invalid 2. The cause of (1.) is due to the gateway list being completely WRONG. Items/channel IDs are all messed up. Activating one channel in the list for example turning on #19 isn't really #19, but will turn on another channel for example 5F and so on. I tested this with multiple channels and I have to rework my whole gateway list one-by-one to remap them. Please fix this faulty list ! Hello, sorry to hear tat you are having issues. Please, contact our Customer Support via the application, by pressing help and providing a short video of the issue, we will need to get a logs from you too. |
|
|
|
1.4.2
Jan 11, 2021 22:12:55 GMT
Post by luisfl on Jan 11, 2021 22:12:55 GMT
Description of bug: Unable to coding iOS software version: 1.4.2 Phone: IPhone Xr Car: SEAT Exeo TDI MY10 User email: siulepilif@gmail.com
Unable to coding with ios. Doesnt show actual values and unable to Wright |
|
Deleted
Deleted Member
Posts: 0
|
1.4.2
Jan 14, 2021 14:15:32 GMT
Post by Deleted on Jan 14, 2021 14:15:32 GMT
Description of bug:
As you can see in the pictures below when you go to History, Select the Filter option (as I only want to see backups) The filter screen starts at Adaptations However if you scroll up (counter intuitive at the start of the process) you will find more options.
Very annoying when you have manually unticked all the ones you don't want to find there are more options that need to be cleared.
From History screen use Filter
| Start View when you have selected Filter
| Hidden values that you have to scroll up to find
|  |  |  |
IOS software version: IOS 14.2 Phone: Iphone 6s Car: seat leon cupra 280 - the best User email: cupra280.co.uk |
|
Deleted
Deleted Member
Posts: 0
|
1.4.2
Jan 19, 2021 12:17:16 GMT
Post by Deleted on Jan 19, 2021 12:17:16 GMT
|
|
